2000 Mazda MX-5

Front Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Suspension arm corroded but not seriously weakened all arms (5.3.3 (b) (i))

Rear Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened all arms (5.3.3 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition (8.1.1 (a))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill corroded hole (6.1.1 (c) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Front Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Suspension arm corroded but not seriously weakened all arms (5.3.3 (b) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Rear Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened all arms (5.3.3 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Front Power steering pipe/hose leaking (2.1.5 (a))

Brake hose has slight corrosion to ferrule All ferrules (1.1.12 (f) (i))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Suspension arm corroded but not seriously weakened All arms corroded upper and lower. (5.3.3 (b) (i))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened All arms corroded upper and lower. (5.3.3 (b) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Brake disc significantly and obviously worn inner side (1.1.14 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Brake disc significantly and obviously worn inner side (1.1.14 (a) (i))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced rear outer sill (7.1.1 (a) (i))

Power steering pipe/hose leaking (2.1.5 (a))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Windscreen washer not working (3.5 (a))

all front and rear suspension arms corroded

both front inner wheel arches corroded

brake fluid level low

front and rear sub frames corroded

front number plate deteriorating

near side rear outer sill rusting

run-out on front brake discs

Rear Tyre worn close to legal limit/worn on edge both rear (5.2.3 (e))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

suspension components corroded

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

corrosion to most suspension components but not exessive

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Oil leak ()

light corrosion to most suspension components

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (2.4.A.3)

Nearside Front Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside front brake juddering slightly (3.7.A.2b)

Offside front brake juddering slightly (3.7.A.2b)

Nail in offside rear tyre

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nail in offside rear tyre

Nearside Front Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

vehicle undershield damaged

wipers worn

vehicle undershield damaged

wipers worn

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Windscreen washer provides insufficient washer liquid (8.2.3)