2000 Honda CB500

Exhaust noisy (8.1.1 (a))

Front Brake binding but not excessively (1.2.1 (f))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Brake pad(s) close to minimum limit Also quite rusty (1.1.13 (a))

Steering headbearing has slight free play (2.2.2 (f) (i))

Exhaust noisy (8.1.1 (a))

Front Brake binding but not excessively (1.2.1 (f))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Brake lever insecure (1.1.2 (e) (i))

Front Brake pad(s) close to minimum limit Also quite rusty (1.1.13 (a))

Front Stop lamp not working (4.3.1 (a) (ii))

Steering headbearing has slight free play (2.2.2 (f) (i))

Exhaust noisy (8.1.1 (a))

Nearside Front Direction indicator light intensity reduced (4.4.3 (a))

Nearside Front Direction indicator slightly discoloured (4.4.3 (a))

Offside Front Direction indicator light intensity reduced (4.4.3 (a))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Drive chain excessively loose (6.1.7 (c) (i))

Drive chain worn to excess (6.1.7 (c) (i))

Rear Drive chain sprocket worn to excess (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Front Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Nearside Front Direction indicator light intensity reduced (4.4.3 (a))

Nearside Front Direction indicator slightly discoloured (4.4.3 (a))

Offside Front Direction indicator light intensity reduced (4.4.3 (a))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Wheel alignment slightly misaligned (2.4 (a))

Corrosion between rear brake disc and wheel is causing the brake to fluctuate, this will worsen, repair a.s.a.p.

Exhaust noisy (8.1.1 (a))

Exhaust silencer slightly loose Exhaust secure but silencer support band missing, would advise replacement. (8.1.1 (b) (i))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Steering headbearing has slight free play (2.2.2 (f) (i))

Front Brake hose excessively damaged (1.1.12 (b) (ii))

Headlamp insecure Headlamp holder/bracket very loose in steering yoke (4.1.1 (c))

Horn sound not in accordance with requirements (7.7 (c))

Steering operation restricted in free movement from lock to lock Trapping brake hose (2.1.4 (c))

Exhaust noisy (8.1.1 (a))

Exhaust silencer slightly loose Exhaust secure but silencer support band missing, would advise replacement. (8.1.1 (b) (i))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Steering headbearing has slight free play (2.2.2 (f) (i))

Exhaust noisy (7.1.2)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Steering headbearing has slight free play (2.2.2)

Nearside Steering lock stop ineffective (2.1.3)

Rear Wheel alignment incorrect which adversely affects the steering To RHS (2.5.1)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a) DANGEROUS

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a) DANGEROUS

Exhaust noisy (7.1.2)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Steering headbearing has slight free play (2.2.2)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Wheel alignment slightly misaligned. To RHS (2.5.1)

Front Stop lamp remains on when the brake is released (1.3.1e)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Wheel alignment slightly misaligned. To RHS (2.5.1)

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Tyre valve stem slightly damaged (4.1.2c)

Steering headbearing has slight free play (2.2.2)

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

O/S Chain adjusters loose

R clip missing from rear brake pin

Rear Tyre valve stem slightly damaged (4.1.2c)

Steering headbearing has slight free play (2.2.2)

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)