2000 Mazda Bongo

Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement Both (5.3.4 (a) (i))

Front Tyre slightly damaged/cracking or perishing Both (5.2.3 (d) (ii))

Front Windscreen wiper blade defective (3.4 (b) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension rod corroded but not seriously weakened (5.3.3 (b) (i))

Rear Tyre slightly damaged/cracking or perishing Both (5.2.3 (d) (ii))

Central Brake pipe corroded, covered in grease or other material front to rear metal brake pipe corroded (1.1.11 (c))

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material corroded (1.1.11 (c))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material corroded (1.1.11 (c))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive Sill ends corroded (5.3.6 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis rails / cross members (5.3.6 (a) (i))

Rear Suspension rod corroded but not seriously weakened rear suspension components corroded / bushes worn (5.3.3 (b) (i))

Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Seat belt anchorage prescribed area is corroded but not considered excessive Inner and outer sill corroded (7.1.1 (a) (i))

Vehicle is heavily under sealed

Nearside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Offside Obligatory mirror insecure (3.3 (b) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm tyre tread worn low tyre cracked and in poor condition (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Anti-roll bar attachment bracket/mounting missing (5.3.3 (a) (ii)) DANGEROUS

Central Brake pipe corroded, covered in grease or other material front to rear metal brake pipe corroded (1.1.11 (c))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material corroded (1.1.11 (c))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material corroded (1.1.11 (c))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive Sill ends corroded (5.3.6 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis rails / cross members (5.3.6 (a) (i))

Rear Suspension rod corroded but not seriously weakened rear suspension components corroded / bushes worn (5.3.3 (b) (i))

Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Seat belt anchorage prescribed area is corroded but not considered excessive Inner and outer sill corroded (7.1.1 (a) (i))

Emissions unable to be completed Exhaust system incomplete (8.2.2.2 (e))

Horn not working (7.7 (a))

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Rear Anti-roll bar attachment bracket/mounting insecure and impairing directional stability (5.3.3 (a) (ii)) DANGEROUS

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Spare tyre defective ()

Horn not working (7.7 (a))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Spare tyre defective ()

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Nail in tyre ()

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis (5.3.6 (a) (ii)) DANGEROUS

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Nail in tyre ()

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Nearside Front Inner Brake pipe excessively corroded (1.1.11 (c))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Lower crossmember (5.3.6 (a) (i))

Nearside Front Upper Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Inner Brake pipe excessively corroded (1.1.11 (c))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Lower crossmember (5.3.6 (a) (i))

Offside Front Upper Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Brake hose has slight corrosion to ferrule Both fronts (1.1.12 (f) (i))

Central Rear Upper Brake pipe corroded, covered in grease or other material Heavily corroded (1.1.11 (c))

Exhaust has a minor leak of exhaust gases Centre rear joining flange heavily corroded (6.1.2 (a))

Nearside Front Tyre worn close to legal limit/worn on edge 3mm of tread approx (5.2.3 (e))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Upper chassis panhard arm mounting area heavily corroded (5.3.6 (a) (i))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced Outer chassis (6.1.1 (c) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside rear tyre outer sidewall has slight cut

Rear Towbar slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced Outers (6.1.1 (c) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced Both sills heavily corroded (6.1.1 (c) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced Front upper (6.1.1 (c) (i))

Brake hose has slight corrosion to ferrule both front pipes (1.1.12 (f) (i))

Central Brake pipe corroded, covered in grease or other material main front to rear pipe (1.1.11 (c))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

temporary fuel cap fitted but still maintaining sealing arrangements

Brake hose has slight corrosion to ferrule both front pipes (1.1.12 (f) (i))

Central Brake pipe corroded, covered in grease or other material main front to rear pipe (1.1.11 (c))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Position lamp not working (4.2.1 (a))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

temporary fuel cap fitted but still maintaining sealing arrangements

Brake pipe corroded, covered in grease or other material Front to rear at rear (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Temporary fuel cap fitted but sealing arrangement satisfactory

The ferrules of both front flex brake hoses are corroding

Nearside Towbar excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Offside Towbar excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Brake pipe corroded, covered in grease or other material Front to rear at rear (1.1.11 (c))

Corrosion in offside inner sill but outside of prescribed area

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Temporary fuel cap fitted but sealing arrangement satisfactory

The ferrules of both front flex brake hoses are corroding

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg (5.3.6 (a) (i))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Sill (7.1.1 (a) (i))

Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Battery insecure

Child seat fitted not allowing full inspection of adult belt

Nearside Outer Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Outer Front constant velocity joint gaiter deteriorated (2.5.C.1a)

nearside and offside front inner sills corroded and holed but not a prescribed area

nearside front brake disc pitted on inner face

nearside outer sill corroded and holed but not a prescribed area

offside front tyre worn on inner edge [block tread]

rear coil springs corroded

rear crossmember corroded but not holed

underside of vehicle showing signs of corrosion

Nearside Outer Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Nearside Rear Trailing arm severely distorted (2.4.G.1)

Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.6.6)

Offside Outer Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Offside Rear Trailing arm severely distorted (2.4.G.1)

Offside Rear fog lamp insecure (1.3.2a)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Battery insecure

Child seat fitted not allowing full inspection of adult belt

Nearside Outer Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Outer Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.C.1a)

nearside and offside front inner sills corroded and holed but not a prescribed area

nearside front brake disc pitted on inner face

nearside outer sill corroded and holed but not a prescribed area

offside front tyre worn on inner edge [block tread]

rear coil springs corroded

underside of vehicle showing signs of corrosion

Nearside Front brake disc slightly pitted (3.5.1h)

Offside Front brake disc slightly pitted (3.5.1h)

Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)

Nearside Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)