2000 Toyota Yaris

Front Headlamp lens slightly defective Both sides (4.1.1 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Registration plate lamp missing in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))

Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Oil leak, but not excessive sump corroded (8.4.1 (a) (i))

fuel filler neck corroded

Nearside Front Tyre slightly damaged/cracking or perishing slight cracking / perishing (5.2.3 (d) (ii))

Nearside Rear Direction indicator slightly discoloured (4.4.3 (a))

Nearside Rear Tyre slightly damaged/cracking or perishing slight cracking / perishing (5.2.3 (d) (ii))

Nearside Rear Wheel bearing has slight play movement side to side (5.1.3 (a) (i))

Offside Front Tyre slightly damaged/cracking or perishing slight cracking / perishing (5.2.3 (d) (ii))

Offside Rear Direction indicator slightly discoloured (4.4.3 (a))

Offside Rear Tyre slightly damaged/cracking or perishing slight cracking / perishing (5.2.3 (d) (ii))

anti roll bar linkage rubbers are deteriorated and starting to brake away both fronts

fuel filler neck pipe corroded

sump pan is corroded but not leaking

wheel trims fitted not allowing full inspection of brake pad thickness or wheel fixings

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Offside Headlamp aim too low (4.1.2 (a))

Offside Rear Vehicle structure is fractured and structural rigidity is significantly reduced inner sill holed (6.1.1 (a) (i))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Front to rear from the load valve and both rear metal brake pipes rusted and degrading

Nearside front metal brake pipe rusted and degrading

Offside front tyre worn to 2mm

Rear brakes pulsating in service

Rear road springs rusted

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Suspension component mounting prescribed area is excessively corroded Both inner sills (outside the vehicle) (2.4.A.3)

Suspension component mounting prescribed area is excessively corroded Both outer sills (2.4.A.3)

Front to rear from the load valve and both rear metal brake pipes rusted and degrading

Headlamp aim too high Both (1.8)

Nearside front metal brake pipe rusted and degrading

Offside front tyre worn to 2mm

Rear brakes pulsating in service

Rear road springs rusted

Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Headlamp deteriorated but light output not reduced (1.7.5a)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Registration plate lamp not working (1.1.C.1d)

Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nail in offside rear tyre

Nearside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nail in offside front tyre

Nearside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Headlamp deteriorated but light output not reduced (1.7.5a)

nsf tyre 2mm

osf tyre 2mm

osr tyre perished & cracked

Exhaust system not adequately supported (7.1.1)

Nail in offside front tyre

Nearside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Headlamp deteriorated but light output not reduced (1.7.5a)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

nsf tyre 2mm

osf tyre 2mm

osr tyre perished & cracked

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Windscreen wiper blade insecure (8.2.2)