MOT Status
ExpiredMileage
133,677 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Battery insecure (1.9.1)
Body has a sharp edge caused by corrosion (6.1.C.1)
Brake pedal anti-slip provision missing (3.3.A.1b)
Nearside Front Direction indicator insecure (1.4.A.2b)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Registration plate lamp not working (1.1.C.1d)
Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS
1.off side front seat belt webbing becomming frayed 2.near side front tyre wearing low on edges 3.slight damage to near side and off side rear light lenses 4.both rear shock absorbers lower mounting bushes becomming perished
Nearside Rear Leaf spring has slight wear in a shackle pin and/or bush (2.4.B.2)
Offside Rear Leaf spring has slight wear in a shackle pin and/or bush (2.4.B.2)
Exhaust has a major leak of exhaust gases (7.1.2)
Fuel system component leaking (7.2.3)
Nearside Front Headlamp not working on dipped beam (1.7.5a)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Leaf spring has slight wear in a shackle pin and/or bush (2.4.B.2)
Offside Rear Leaf spring has slight wear in a shackle pin and/or bush (2.4.B.2)
Fuel hose leaking (7.2.3)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Rear Shock absorber has an excessively worn bush (2.7.4)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
steering rack leaking slightly
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside rear brake binding (3.7.B.1)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
nearside rear bumper insecure
steering rack leaking slightly
Nail in nearside rear tyre
Repaired areas have a heavy coating making inspection difficult.Sections of repair have been carried out on inside of vehicle panel,which appears satisfactory.
Slight binding n/s/r brake.
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside rear brake binding (3.7.B.1)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nail in nearside rear tyre
Centre Brake pipe inadequately clipped (3.6.B.1)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside rear brake binding (3.7.B.1)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside rear brake recording little or no effort (3.7.B.5a)
Battery insecure
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Front front brake application uneven (3.7.B.2)
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Headlamp aim too high (1.8)
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Headlamp aim too high (1.8)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear rear brake recording little or no effort (3.7.B.5a)
Offside Rear rear parking brake recording little or no effort (3.7.B.6a)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Power steering component(s) leaking from a failed seal (2.3.3b)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
many parts at early stages of corrosion
parts of exhaust getting weak
Offside Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Offside Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Offside Rear Shock absorber has a slightly worn bush (2.7.4)
Rear Tyre worn close to the legal limit (4.1.E.1)
dust cover perished n/s bottom ball joint
parts of structure at earlier stages of corrosion
Front Bonded suspension unit deteriorated but can function as intended (2.4.F.3)
Front Brake hose slightly deteriorated (3.6.B.4d)
Front brake disc slightly pitted (3.5.1h)
Front brake disc slightly scored (3.5.1h)
sheilds fitted
Nearside Rear Leaf spring has excessive wear in a shackle pin and/or bush (2.4.B.2)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Rear Leaf spring has excessive wear in a shackle pin and/or bush (2.4.B.2)
Front Bonded suspension unit deteriorated but can function as intended (2.4.F.3)
Front Brake hose slightly deteriorated (3.6.B.4d)
Front brake disc slightly pitted (3.5.1h)
Front brake disc slightly scored (3.5.1h)
sheilds fitted
both front discs corroed
front number plate poor
n/s/r brake slightly binding
Centre Brake pipe excessively corroded (3.6.B.2c)
Front registration plate deteriorated (6.3.1d)
Nearside Front Brake pipe excessively corroded (3.6.B.2c)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Rear Lower Shock absorber has an excessively worn bush (2.7.4)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Front brake disc slightly pitted (3.5.1h)
Offside Front brake disc slightly pitted (3.5.1h)
n/s/r brake slightly binding
How Reliable is the Nissan Vanette?
Based on 206,210 MOT tests across 22,429 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
W992 WMJ is a 2000 Nissan Vanette in White with a 2,283cc diesel engine. This vehicle has been through 16 MOT tests with a personal pass rate of 43.8%.
Across all 2000 Nissan Vanette models, the average MOT pass rate is 62.9% with a typical mileage of 85,074 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Nissan Vanette fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 32,381 recorded failures. If you're considering buying W992 WMJ, it's worth having these areas checked by a mechanic before committing.
The Nissan Vanette typically stays on UK roads for around 34 years. At 26 years old, this Nissan Vanette is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of W992 WMJ?
You can check the full history of W992 WMJ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was W992 WMJ registered?
W992 WMJ is a 2000 Nissan Vanette, first registered on 26 May 2000.
Is W992 WMJ safe to buy?
The MOT history for W992 WMJ shows 16 tests with a 43.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does W992 WMJ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on W992 WMJ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.