2003 Suzuki VL125

Exhaust noisy (8.1.1 (a))

Front Tyre worn close to the legal limit (5.2.3 (e))

Front Wheel damaged but not to excess (5.2.2 (c) (i))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Front Wheel damaged but not to excess (5.2.2 (c) (i))

Exhaust noisy (8.1.1 (a))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Drive chain slightly loose (6.1.7 (c) (i))

Front Brake excessively binding (1.2.1 (f))

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Drive chain slightly loose (6.1.7 (c) (i))

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Drive chain sprocket slightly worn (6.2.1e)

Drive chain worn but not considered excessive (6.2.1e)

Front Floor brake test indicates a slightly grabbing brake (3.3.C2d)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front wheel bearings are slightly rough (2.3.5b)

Front wheel bearings have slight free play (2.3.5b)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

slightly binding front brake

Front Wheel has an excessively distorted bead rim. (4.2.2)

Front wheel bearings are excessively rough (2.3.5b)

Headlamp aim too high and too far to the right. (1.6)

Rear Brake reaction bracket insecure (3.2.A1j)

Drive chain worn but not considered excessive (6.2.1e)

Rear Drive chain sprocket slightly worn (6.2.1e)

horn weak

Brake linkage has abnormal movement due to excessive wear (3.2.A1i)

Brake linkage has abnormal movement due to maladjustment (3.2.A1i)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

front tyre perished and split

slight bind to front brake

Steering headbearing has excessive free play (2.2.2)

Drive chain worn to excess (6.2.1e)

Front Brake lining(s) contaminated by oil or grease (3.2.A1k)

Front Roller brake test indicates a binding brake (3.3.A1a)

Rear Brake pedal has inadequate reserve travel (3.1.3b)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Front shock absorber has light misting of stanchion (2.3.3)

Centre Front Lower Front wheel bearings have excessive free play (2.3.5b)