MOT Status
ValidMileage
100,648 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
underbody has thick underseal protection applied to it front to rear some type of repair has been placed beneath
Nearside Rear Sub-frame corroded and seriously weakened (5.3.3 (b) (i))
Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))
Nearside Rear Registration plate lamp missing in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))
Rear Subframe Rusted But Not Holed
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Oil leak, but not excessive Sump Rusty (8.4.1 (a) (i))
Rear Subframe Rusted But Not Holed
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement Rear Bush (2.4.G.2)
Rear Tyres starting to deteriorate
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement Rear Bush (2.4.G.2)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Rear Tyres starting to deteriorate
Both rear tyres mishaped. 3mm to 4mm.
Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
WA06 FSY is a 2006 Mazda 3 in Black with a 1,598cc petrol engine. This vehicle has been through 23 MOT tests with a personal pass rate of 78.3%.
Across all 2006 Mazda 3 models, the average MOT pass rate is 74.6% with a typical mileage of 70,278 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying WA06 FSY, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 20 years old, this Mazda 3 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of WA06 FSY?
You can check the full history of WA06 FSY by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was WA06 FSY registered?
WA06 FSY is a 2006 Mazda 3, first registered on 9 March 2006.
Is WA06 FSY safe to buy?
The MOT history for WA06 FSY shows 23 tests with a 78.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does WA06 FSY have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on WA06 FSY. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.