MOT Status
ExpiredMileage
151,723 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement Trailing arm bush (5.3.4 (a) (i))
Nearside Rear reflector defective or damaged by up to 50% of the reflecting surface (4.8.1 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement Trailing arm bush (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Suspension component pin or bush slightly worn trailing arm (5.3.4 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear reflector defective or damaged by up to 50% of the reflecting surface (4.8.1 (a) (i))
Offside Rear Suspension component pin or bush slightly worn trailing arm (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Suspension component pin or bush slightly worn trailing arm (5.3.4 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear reflector defective or damaged by up to 50% of the reflecting surface (4.8.1 (a) (i))
Offside Rear Suspension component pin or bush slightly worn trailing arm (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Nearside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Nearside Rear reflector defective or damaged by up to 50% of the reflecting surface (4.8.1 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Boot floor corroding
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive floor to sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive floor to sill (5.3.6 (a) (i))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Exhaust deteriorating
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive floor to sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive floor to sill (5.3.6 (a) (i))
Slight corrosion boot floor
Unable to fully inspect outer sills, trim fitted
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Exhaust deteriorating
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive floor to sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive floor to sill (5.3.6 (a) (i))
Slight corrosion boot floor
Unable to fully inspect outer sills, trim fitted
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Nearside Rear Lamp lens cracked, but not showing white light to rear
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive Jacking point (2.4.A.3)
Oil leak ()
Various underside corrosion
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Offside Rear Steering component mounting prescribed area is excessively corroded Inner wheel arch (2.2.C.1h)
Offside Rear Suspension component mounting prescribed area is excessively corroded Inner wheel arch (2.4.A.3)
Nearside Rear Lamp lens cracked, but not showing white light to rear
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive Jacking point (2.4.A.3)
Oil leak ()
Various underside corrosion
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Both rear tyre treads stepping
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Both pedal rubbers worn
Centre Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)
Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Both pedal rubbers worn
Centre Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Rear Exhaust bracket rusted/broken, however still supported
Centre Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nail in nearside rear tyre
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Pedal rubbers worn
Centre Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nail in nearside rear tyre
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Headlamp aim too low (1.8)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Headlamp aim too low (1.8)
Offside Registration plate lamp not working (1.1.C.1d)
Pedal rubbers worn
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Front Shock absorber has a serious fluid leak (2.7.3)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Both front wishbone inner rear bushes starting to separate
Front Brake pad(s) wearing thin (3.5.1g)
N/S/R traling arm bush has slight bonding failure
Nearside Front position lamp(s) not working (1.1.A.3b)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front position lamp(s) not working (1.1.A.3b)
Stonechip in windscreen
Both front wishbone inner rear bushes starting to separate
Front Brake pad(s) wearing thin (3.5.1g)
N/S/R traling arm bush has slight bonding failure
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Stonechip in windscreen
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pad(s) wearing thin (3.5.1g)
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
WA06 XRL is a 2006 Mazda 3 in Blue with a 1,560cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 63.6%.
Across all 2006 Mazda 3 models, the average MOT pass rate is 74.6% with a typical mileage of 70,278 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying WA06 XRL, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 20 years old, this Mazda 3 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of WA06 XRL?
You can check the full history of WA06 XRL by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was WA06 XRL registered?
WA06 XRL is a 2006 Mazda 3, first registered on 10 March 2006.
Is WA06 XRL safe to buy?
The MOT history for WA06 XRL shows 22 tests with a 63.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does WA06 XRL have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on WA06 XRL. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.