2007 Proton GEN-2

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Fuel cap/sealing device ineffective (6.1.3 (b) (i))

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail (5.3.6 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Headlamp aim too high (4.1.2 (a))

Offside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail (5.3.6 (a) (i))

Offside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail/inner arch (5.3.6 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced floor to chassis (6.1.1 (c) (i))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced floor to chassis (6.1.1 (c) (i))

Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member next to gear box mounting sepperated and corroded (6.1.1 (c) (i))

Nearside Front Front passenger door cannot be opened from outside the vehicle (6.2.3 (a))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Headlamp not working on main beam (4.1.1 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Rear Inner Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Offside Rear Inner Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced floor to chassis (6.1.1 (c) (i))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced floor to chassis (6.1.1 (c) (i))

Rear Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member ,next to engine mounting (5.3.6 (a) (i))

Nearside Rear Hydraulic brake calliper leaking (1.1.16 (b) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis next to anti roll bar mounting point (5.3.6 (a) (i))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside rear brake recording little or no effort (3.7.B.5a)

Parking brake: efficiency below requirements (3.7.B.7)

Parking brake lever has little reserve travel (3.1.6b)

Power steering component(s) has slight seepage from a component (2.3.3b)

centre rear seat belt missing

Centre Rear Seat belt retracting mechanism defective (5.2.5b)

Offside Registration plate lamp not illuminating the registration plate (1.1.C.1e)

Parking brake lever has little reserve travel (3.1.6b)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Power steering component(s) has slight seepage from a component (2.3.3b)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

rear exhaust join corroded

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Registration plate lamp not illuminating the registration plate (1.1.C.1e)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Items removed from driver's view prior to test

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

exhaust support rubbers deteriorated

rear exhaust join corroded