MOT Status
ValidMileage
218,713 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill area (5.3.6 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill area (5.3.6 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Offside Headlamp not working on main beam (4.1.1 (a) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill area (5.3.6 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill area (5.3.6 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Front Lower Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced front cross member (6.1.1 (c) (i))
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced front cross member (6.1.1 (c) (i))
Front Exhaust has a minor leak of exhaust gases Front flexi joint slight leak of exhaust gases (6.1.2 (a))
Front Vehicle structure is corroded but structural rigidity is not significantly reduced area under radiator corroded (6.1.1 (c) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced area near rear springs corroded. (6.1.1 (c) (i))
Brake pedal wearing smooth (1.1.2 (c))
Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material brake line close to fuel tank (1.1.11 (c))
Nearside Rear Brake pipe corroded, covered in grease or other material in wheel arch (1.1.11 (c))
Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Rear Brake pipe corroded, covered in grease or other material in wheel arch (1.1.11 (c))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced all attached components on rear corroded (6.1.1 (c) (i))
Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced area marked with chalk (6.1.1 (c) (i))
Brake pedal wearing smooth (1.1.2 (c))
Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material brake line close to fuel tank (1.1.11 (c))
Nearside Rear Brake pipe corroded, covered in grease or other material in wheel arch (1.1.11 (c))
Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Rear Brake pipe corroded, covered in grease or other material in wheel arch (1.1.11 (c))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced all attached components on rear corroded (6.1.1 (c) (i))
Central Front Gearbox mounting defective wear in bushing ()
Central Front Vehicle structure is corroded but structural rigidity is not significantly reduced under radiator area corroded (6.1.1 (c) (i))
Front Brake pedal wearing smooth (1.1.2 (c))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush for lower arm perished but not excessively (5.3.4 (a) (i))
Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced area near sub frame mounting corroded but not excessively (6.1.1 (c) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush for lower arm perished but not excessively (5.3.4 (a) (i))
Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Brake pedal wearing smooth (1.1.2 (c))
Vehicle structure is corroded but structural rigidity is not significantly reduced all of vehicle corroded (6.1.1 (c) (i))
Offside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced corroded close to rear of front sub frame mounting (6.1.1 (c) (i))
Offside Rear Inner Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Brake pedal wearing smooth (1.1.2 (c))
Nearside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Vehicle structure is corroded but structural rigidity is not significantly reduced all of vehicle corroded (6.1.1 (c) (i))
Nearside Rear Outer Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Outer Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Nearside Rear Outer Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Outer Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Fuel pipe leaking fuel tank filler pipe corroded excessively and holed (7.2.3)
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Electrical wiring insecure Battery Earth conection (1.9.2a)
Fuel pipe/s corroded
Items removed from driver's view prior to test
Nearside Headlamp aim too high and too far to the right. (1.8)
Nearside Inner Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Trailing arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Play in steering rack inner joint(s)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
rear exhaust hanger partially broken away (system still supported)
Fuel pipe/s corroded
Items removed from driver's view prior to test
Nearside Inner Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Trailing arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Play in steering rack inner joint(s)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
rear exhaust hanger partially broken away (system still supported)
Nearside Inner Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Play in steering rack inner joint(s)
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Items removed from driver's view prior to test
Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Nearside Front Headlamp aim too high (1.8)
Offside Front Front position lamp(s) not working (1.1.A.3b)
Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Items removed from driver's view prior to test
Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Items removed from driver's view prior to test
Nearside Headlamp aim too high (1.8)
Nearside Inner Rear Anti-roll bar synthetic mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)
Items removed from driver's view prior to test
Nearside Inner Rear Anti-roll bar synthetic mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Inner Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nail in offside rear tyre
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)
How Reliable is the Mitsubishi Lancer?
Based on 382,912 MOT tests across 33,260 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
WA07 VKV is a 2007 Mitsubishi Lancer in Silver with a 1,584cc petrol engine. This vehicle has been through 31 MOT tests with a personal pass rate of 64.5%.
Across all 2007 Mitsubishi Lancer models, the average MOT pass rate is 76.0% with a typical mileage of 58,831 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mitsubishi Lancer fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 9,095 recorded failures. If you're considering buying WA07 VKV, it's worth having these areas checked by a mechanic before committing.
The Mitsubishi Lancer typically stays on UK roads for around 30 years. At 19 years old, this Mitsubishi Lancer is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of WA07 VKV?
You can check the full history of WA07 VKV by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was WA07 VKV registered?
WA07 VKV is a 2007 Mitsubishi Lancer, first registered on 30 April 2007.
Is WA07 VKV safe to buy?
The MOT history for WA07 VKV shows 31 tests with a 64.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does WA07 VKV have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on WA07 VKV. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.