2008 Iveco Daily

Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

sign of repair covered in thick black sealant

Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Nearside Front Upper Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i))

Nearside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i))

Nearside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i))

Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i))

Offside Rear Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Subframe mounting prescribed area is corroded but not considered excessive n/s and o/s (5.3.6 (a) (i))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

all repairs undersealed

Horn not working (7.7 (a))

Nearside Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))

Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill-front of rear wheelarch (6.1.1 (c) (i))

Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill-rear of rear wheelarch (6.1.1 (c) (i))

Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheelarch (5.3.6 (a) (i))

Offside Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))

Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill-rear of rear wheelarch (6.1.1 (c) (i))

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Front Brake hose has slight corrosion to ferrule x2 n/s and o/s (1.1.12 (f) (i))

Front Brake pipe corroded, covered in grease or other material x2 n/s and o/s (1.1.11 (c))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Brake hose has slight corrosion to ferrule x2 n/s and o/s (1.1.12 (f) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive n/s and o/s body/ subframe mounting area (5.3.6 (a) (i))

Nearside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Leaf spring has slight wear in a shackle pin and/or bush (5.3.4 (a) (i))

Offside Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Offside Rear Leaf spring has slight wear in a shackle pin and/or bush (5.3.4 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened x2 (1.1.14 (a) (ii))

Tyre worn close to legal limit/worn on edge all tyres (5.2.3 (e))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Leaf spring has slight wear in a shackle pin and/or bush n/s & o/s (5.3.4 (a) (i))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Front Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Lower Suspension arm corroded but not seriously weakened (2.4.G.1)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive floor (2.4.A.3)

Offside Front Lower Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive floor (2.4.A.3)

Nearside Front Inner Suspension component mounting prescribed area is excessively corroded wing (2.4.A.3)

Offside Front Lower Sub-frame corroded and seriously weakened (2.4.G.1)

Nearside Front Lower Suspension arm corroded but not seriously weakened (2.4.G.1)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive floor (2.4.A.3)

Offside Front Lower Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive floor (2.4.A.3)

Horn not working (1.6.2a)

Nearside Front Inner Suspension component mounting prescribed area is excessively corroded wing (2.4.A.3)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Lower Sub-frame corroded and seriously weakened (2.4.G.1)

Offside Front Upper Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Lower Suspension arm corroded but not seriously weakened (2.4.G.1)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive floor (2.4.A.3)

Offside Front Lower Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive floor (2.4.A.3)

Horn not working (1.6.2a)

Nearside Front Inner Subframe mounting prescribed area is excessively corroded wing (2.4.A.3)

Nearside Front Lower Suspension arm corroded and seriously weakened (2.4.G.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor (6.1.B.2)

Offside Front Inner Subframe mounting prescribed area is excessively corroded wing (2.4.A.3)

Offside Front Lower Sub-frame corroded and seriously weakened (2.4.G.1)

Offside Front Lower Suspension arm corroded and seriously weakened (2.4.G.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Offside Registration plate lamp not working (1.1.C.1d)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Offside Front Body has slight corrosion floor (6.1.B.2)

Offside Front position lamp(s) has light sources not illuminating, but not more than 50% (1.1.A.3b)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Body has slight corrosion (6.1.B.2)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Lower Body has slight corrosion (6.1.B.2)

Nearside Inner Front Lower Suspension arm has slight play in a pin/bush (2.4.G.2)

Nearside Inner Front Upper Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Inner Front Lower Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Inner Front Upper Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside rear parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.6b)

Vehicle structure has slight corrosion (6.1.A.1)

Offside Front Lower Brake master cylinder/servo mounting prescribed area is excessively corroded (3.6.C.3)

Offside Inner Front Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Body has slight corrosion (6.1.B.2)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Lower Body has slight corrosion (6.1.B.2)

Nearside Inner Front Lower Suspension arm has slight play in a pin/bush (2.4.G.2)

Nearside Inner Front Upper Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Inner Front Lower Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Inner Front Upper Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside rear parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.6b)

Vehicle structure has slight corrosion (6.1.A.1)

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Outer Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Nearside Rear Leaf spring has slight wear in a shackle pin and/or bush (2.4.B.2)

Offside Outer Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Leaf spring has slight wear in a shackle pin and/or bush (2.4.B.2)

Offside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside rear brake disc pitted