2008 Derbi Senda

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

rear wheel baring has slight play

Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Rear Lower Suspension pin, bush or joint worn but not resulting in excessive movement Bush slight free play! (5.3.4 (a) (i))

Rear Suspension pin, bush or joint worn but not resulting in excessive movement Swinging arm bush slight free play! (5.3.4 (a) (i))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Rear Suspension pin, bush or joint worn but not resulting in excessive movement Bush slight free play! (5.3.4 (a) (i))

Rear Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Front Brake lever insecure Lever plunger bent & insecure! (1.1.2 (e) (i))

Rear Drive chain sprocket excessively loose Sprocket securing bolts have no lock nuts on back of bolt! (6.1.7 (c) (i))

Rear Registration plate lamp missing in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Rear reflector missing (4.8.2 (a) (ii))

Wheel alignment incorrect which adversely affects the handling (2.4 (a))

Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) DANGEROUS

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Rear Drive chain slightly loose (6.1.7 (c) (i))

Rear Suspension pin, bush or joint worn but not resulting in excessive movement Bush slight free play! (5.3.4 (a) (i))

Rear Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Rear Sprocket bolts to long & are hitting spokes in the rear wheel!

Suspension arm slightly loose SWINGARM (5.3.3 (a) (i))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Suspension arm slightly loose SLIGHT FREEPLAY (SWINGARM) (5.3.3 (a) (i))

Rear suspension bush has slight free play (2.4.A2a(i))

Rear wheel bearings have slight free play (2.4.A.2c)

Direction indicator damaged and function impaired (1.5.3a)

Front shock absorber seal failed and leaking oil (2.3.3)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Rear suspension bearing has excessive free play Swingarm. (2.4.A2a(i))

Rear wheel bearings have excessive free play (2.4.A.2c)

Registration plate does not have black characters on a yellow background (6.3.2a)

Steering headbearing has excessive free play (2.2.2)

Rear Exhaust is leaking and excessively noisey (7.1.1b)

Rear Brake pad(s) contaminated by oil or grease (3.2.A1k) DANGEROUS

Exhaust mounting deteriorated. (7.1.1.c)

rear swing arm bearings exsesive play

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Rear Rear reflector on motorcycle missing (1.4.1)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Nearside Rear Direction indicators not working (1.5.1c)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear reflector on motorcycle missing (1.4.1)

rear numberplate slightly water damaged

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

rear numberplate slightly water damaged

Drive chain worn but not considered excessive (6.2.1e)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear mono-shock pivot worn but not excessive (2.4.B.4)

Front Dipswitch does not deflect the main beam/s, making them into dipped beam/s (1.2.2b(ii))

Front Headlamp aim beam image kick up to the offside (1.6)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Rear reflector on motorcycle missing (1.4.1)

Drive chain worn but not considered excessive (6.2.1e)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear mono-shock pivot worn but not excessive (2.4.B.4)