2009 Piaggio Porter

Chassis corroded

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Chassis corroded

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Horn not working (7.7 (a))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Brake pipe excessively corroded (1.1.11 (c))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Service brake efficiency below requirements (1.2.2 (a) (i))

Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Central chassis corroded both sides

Fuel Pipe/s corroded all ()

corrosion on front suspension components

Offside Brake pipe excessively corroded front to rear limit valve x 2 (1.1.11 (c))

Offside Rear Brake pipe excessively corroded to wheel cyl (1.1.11 (c))

Rear fog lamp not working (4.5.1 (a) (ii))

Brake load sensing valve seized and ABS not fitted or inoperative link (1.1.17 (c) (ii)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Fuel pipe leaking excessively or a risk of fire front to tank (6.1.3 (b) (ii)) DANGEROUS

Central chassis corroded both sides

Fuel Pipe/s corroded all ()

corrosion on front suspension components

Front Headlamp reflector slightly defective both sides (4.1.1 (b) (i))

Nearside Front Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Fuel pipes corroded

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Driver's seat with a defective structure (6.2.5 (a) (i))

Offside Front Headlamp aim too low (4.1.2 (a))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Front Headlamp reflector slightly defective both sides (4.1.1 (b) (i))

Nearside Front Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Fuel pipes corroded

Brake pipe corroded, covered in grease or other material main pipe (1.1.11 (c))

Fuel Pipe/s corroded ()

Emissions not tested due to major exhaust leak (8.2.1.2 (d))

Exhaust emissions likely to be affected by an exhaust leak (8.2.2.1 (b))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Headlamp aim too high (4.1.2 (a))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis by crossmember (5.3.6 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Brake pipe corroded, covered in grease or other material main pipe (1.1.11 (c))

Fuel Pipe/s corroded ()

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

corrosion around rear brake pipes

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

corrosion around rear brake pipes

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Steering pivot point has slight play (2.2.B.1g)

Offside Rear rear brake recording little or no effort (3.7.B.5a)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Brake load sensing valve stiff (3.6.E.3)

Steering pivot point has slight play (2.2.B.1g)

Centre Steering pivot point has slight play (2.2.B.1g)

Offside Front Tyre on 2.5mm

rear fuel pipes corroded

Service brake: efficiency below requirements (3.7.B.7)

Centre Steering pivot point has slight play (2.2.B.1g)

Offside Front Tyre on 2.5mm

rear fuel pipes corroded

Front Brake pad(s) wearing thin (3.5.1g)

fuel pipes corroded

Nearside Rear Fuel tank insecure (7.2.1)

fuel pipes corroded

Front Brake pad(s) wearing thin (3.5.1g)

Fuel tank leaking (7.2.3)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Front position lamp(s) not working (1.1.A.3b)

Service brake: efficiency below requirements (3.7.B.7)

Front Brake pad(s) wearing thin (3.5.1g)

fuel pipes corroded