2012 Lexmoto Gladiator 125

Lower Motorcycle structure is fractured but structural rigidity is not significantly reduced (6.1.1 (a) (i))

Headlamp aim too high (4.1.2 (a))

Horn not working (7.7 (a) (ii))

Lower Motorcycle structure is fractured but structural rigidity is not significantly reduced (6.1.1 (a) (i))

Headlamp aim too high (4.1.2 (a))

Horn not working properly (7.7 (a) (i))

Lower Motorcycle structure is fractured but structural rigidity is not significantly reduced (6.1.1 (a) (i))

All direction indicators incorrect colour (4.4.3 (a))

Headlamp aim too high (4.1.2 (a))

Rear Brake lever has insufficient reserve travel (1.1.2 (a))

Rear reflector missing (4.8.2 (a) (ii))

Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Horn not working properly (7.7 (a) (i))

Lower Motorcycle structure is fractured but structural rigidity is not significantly reduced (6.1.1 (a) (i))

Rear Roller brake test indicates a slightly grabbing brake (3.3.A1b)

Front Floor brake test indicates a binding brake (3.3.C2c)

Horn sounds harsh or grating (1.7.3c)

Rear suspension bush has excessive free play engine mounts (2.4.A2a(i))

Rear suspension movement is excessively stiff (2.4.A.3b)

Throttle operating incorrectly (6.2.1f)

Rear Roller brake test indicates a slightly grabbing brake (3.3.A1b)

Headlamp aim too high (1.6)

Rear wheel bearings are excessively rough (2.4.A.2c)

Steering movement slightly stiff (2.2.1a)

Brake lever has inadequate reserve travel (3.1.3b)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Steering movement slightly stiff (2.2.1a)