2004 Ccm 644 Ds

Front Wheel bearing has slight play (5.1.3 (a) (i))

Front front wheel bearing slightly rough when rotated

Brake pedal has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

front wheel bearings slightly rough

Headlamp aim so that beam "kick up" is not visible on the screen dips to the right (4.1.2 (a))

Rear Upper Suspension component pin or bush excessively worn shock absorber bearing (5.3.4 (a) (i))

Rear reflector missing (4.8.2 (a) (ii))

Wheel alignment incorrect which adversely affects the handling (2.4 (a))

Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) DANGEROUS

Brake pedal has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

front wheel bearings slightly rough

Front suspension assembly has slight free play between the sliding members (2.3.4)

Rear Upper Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Steering movement slightly 'notchy' (2.2.1b)

Drive chain excessively tight (6.2.1d)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Front Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d)

Lower Rear mono-shock pivot excessively worn (2.4.B.4)

Nearside Handlebar handgrip not secure to handlebars. (2.1.1c)

Rear reflector on motorcycle missing (1.4.1)

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Front suspension assembly has slight free play between the sliding members (2.3.4)

Steering movement slightly 'notchy' (2.2.1b)

Exhaust noisy (7.1.2)

Exhaust noisy (7.1.2)

Registration plate with character(s) which are not the correct height (6.3.4a)

Rear Registration plate margin less than the minimum requirement (6.3.4g)

Rear Registration plate non-relective border too close to the characters (6.3.4h)

Rear reflector on motorcycle missing (1.4.1)

Steering headbearing has slight free play (2.2.2)

Brake lever is short but brake can still be readily applied (3.1.3c)

Brake pedal pivots slightly worn (3.1.3a)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Front shock absorber seal failed and leaking oil (2.3.3)

Rear wheel bearings have excessive free play (2.4.A.2c)

Drive chain slightly loose (6.2.1d)