2004 Aprilia RS 50

Brake pedal cannot be applied smoothly fouling another component (3.1.3d)

Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp dip beam and main beam working opposite to the switch (1.2.2b(i))

Drive chain worn to excess (6.2.1e)

Front Tyre not fitted in accordance with side wall instruction/s direction wrong (4.1.2e)

Rear Roller brake test indicates a sticking brake (3.3.A1a)

Stop lamp remains on when the brake is released bulb incorrectly fitted or wires on wrong (1.3.1e)

Throttle operating incorrectly cable trapped in steering lock (6.2.1f)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

hand and foot controls bady worn

Fuel system component leaking (7.2.1a)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

chain retaining link on wrong way round

hand and foot controls bady worn

Drive chain excessively loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Front Drive chain sprocket slightly worn (6.2.1e)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear wheel bearings have slight free play (2.4.A.2c)

Drive chain worn but not considered excessive (6.2.1e)

Front Drive chain sprocket slightly worn (6.2.1e)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear wheel bearings have slight free play (2.4.A.2c)

Clutch lever shortened. (6.2.1g)

Front Exhaust is leaking but is not excessively noisey (7.1.1b)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Drive chain excessively tight (6.2.1d)

Front Brake lever is positioned so that the brake cannot be readily applied (3.1.3c)

Front wheel bearings have excessive free play (2.3.5b)

Offside Direction indicators not working (1.5.1c)

Throttle operating incorrectly (6.2.1f)

Clutch lever shortened. (6.2.1g)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Front wheel bearings have excessive free play (2.3.5b)

Nearside Front Direction indicator not working (1.5.1c)

Nearside Handlebar mounting clamp loose (2.1.1a)

Offside Front Direction indicator damaged and function impaired (1.5.3a)

Offside Handlebar mounting clamp loose (2.1.1a)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Drive chain sprocket worn to excess (6.2.1e)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Stop lamp affected by the operation of another lamp (1.3.2)