2006 Proton Savvy

Power steering pipe/hose has slight seepage (2.1.5 (a))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front Headlamp aim too low (4.1.2 (a))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Road wheel badly distorted (5.2.2 (c) (i))

Nearside Rear Road wheel badly distorted (5.2.2 (c) (i))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Headlamp aim too low (4.1.2 (a))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Rear fog lamp not working (4.5.1 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Road wheel slightly distorted (5.2.2 (c) (i))

Power steering pipe/hose has slight seepage (2.1.5 (a))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Front Tyre worn close to legal limit/worn on edge edges (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge edges (5.2.3 (e))

Nearside Front Headlamp aim too low and too far to the left. (4.1.2 (a))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Nearside Headlamp aim too low and too far to the right. (4.1.2 (a))

Nearside Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Headlamp aim too low and too far to the right. (4.1.2 (a))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Shock absorbers has light misting of oil slight leak (5.3.2 (b))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced outer sill (6.1.1 (c) (i))

Offside Rear Tyre slightly damaged/cracking or perishing cracking (5.2.3 (d) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Rear Other passenger door cannot be opened from outside the vehicle (6.2.3 (a))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Power steering ram has slight seepage from a joint (2.1.5 (a))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Tyre fouling a part of the vehicle (5.2.3 (f))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Front Tyre fouling a part of the vehicle (5.2.3 (f))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Power steering ram has slight seepage from a joint (2.1.5 (a))

Nearside Front Tyre fouling a part of the vehicle (5.2.3 (f))

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Headlamp levelling device inoperative (4.1.5 (a))

Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Tyre fouling a part of the vehicle (5.2.3 (f))

Offside Headlamp aim too low (4.1.2 (a))

Offside Headlamp levelling device inoperative (4.1.5 (a))

Power steering component leaking pressure switch on pipe (2.1.5 (a))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords 175/50/15 (5.2.3 (d) (i))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords 175/50/15 (5.2.3 (d) (i))

Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Power steering pipe/hose leaking steering pressure switch (2.1.5 (a))

Offside Rear Nail in tyre ()

Offside Front tyre perished inner sidewall

Nearside Rear Rear wheel bearing has slight play (2.6.2)

Offside Rear Rear wheel bearing has slight play (2.6.2)

Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Child seat fitted not allowing full inspection of adult belt

offside rear tyre worn low on inner edge

Child seat fitted not allowing full inspection of adult belt

Nearside Headlamp aim too low (1.8)

Offside Headlamp aim too low (1.8)

offside rear tyre worn low on inner edge

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)