2014 Qingqi Qm

Front Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Drive chain worn but not considered excessive (6.1.7 (c) (i))

Rear Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

heavy rut on frame mounts

Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Rear Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Front Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Drive chain slightly loose (6.1.7 (c) (i))

Rear Drive chain worn but not considered excessive (6.1.7 (c) (i))

Rear Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

bolt miss from lower clutch arm

heavy rut on frame mounts

Exhaust has a minor leak of exhaust gases downpipe to silencer joint (6.1.2 (a))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake indicates a slightly grabbing brake (1.2.1 (c))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Front indicators fowl bodywork on full steering lock

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Wheel spoke slightly corroded (5.2.2 (d))

Side panels loose but still secure

Rear Brake excessively binding (1.2.1 (f))

Rear reflector missing (4.8.2 (a) (ii))

Exhaust has a minor leak of exhaust gases downpipe to silencer joint (6.1.2 (a))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake indicates a slightly grabbing brake (1.2.1 (c))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Front indicators fowl bodywork on full steering lock

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Wheel spoke slightly corroded (5.2.2 (d))

Side panels loose but still secure

Exhaust noisy (7.1.2)

Front Brake disc(s) slightly worn (3.2.A1l)

Rear Brake disc(s) slightly worn (3.2.A1l)

Front Front wheel bearings have excessive free play (2.3.5b)

Rear Direction indicator missing (1.5.1a)

Rear Front wheel bearings have excessive free play (2.3.5b)

Drive chain slightly loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Exhaust noisy (7.1.2)

Front Brake disc(s) slightly worn (3.2.A1l)

Rear Brake disc(s) slightly worn (3.2.A1l)