2006 Yamaha Yh 50

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) close to minimum limit inner pad (1.1.13 (a))

body work obstructing view of components

Brake fluid contaminated (1.8 (a))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Rear Brake lever has insufficient reserve travel (1.1.2 (a))

Stop lamp remains on when the brakes are released (4.3.2 (a) (iii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) close to minimum limit inner pad (1.1.13 (a))

body work obstructing view of components

Front brake disc slight corosion

Front suspension soft

Headlamp light intensity reduced (4.1.4 (a))

Forks slightly corroded (2.2.2 (d) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened Surface rust (1.1.14 (a) (ii))

Motorcycle structure is corroded but structural rigidity is not significantly reduced Throughout (6.1.1 (c) (i))

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Road spring corroded (5.3.1 (b) (i))

Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Front Lower Brake hose ferrule excessively corroded and likely to fail (1.1.12 (f) (ii)) DANGEROUS

Forks slightly corroded (2.2.2 (d) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened Surface rust (1.1.14 (a) (ii))

Motorcycle structure is corroded but structural rigidity is not significantly reduced Throughout (6.1.1 (c) (i))

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Road spring corroded (5.3.1 (b) (i))

Forks slightly corroded (2.2.2 (d) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pipe slightly corroded Banjo (1.1.11 (c))

Front Wheel bearing has slight play (5.1.3 (a) (i))

Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Road spring corroded (5.3.1 (b) (i))

Brake disc(s) slightly pitted Surface rust (3.2.A1l)

Front Brake component is slightly corroded Banjo (3.1.5)

Front suspension assembly slightly corroded. Stancions (2.3.1)

Offside Front shock absorber has light misting of stanchion (2.3.3)

Oil leak ()

Rear spring corroded but not seriously weakened (2.4A1b(ii))

Brake disc(s) slightly pitted Surface rust (3.2.A1l)

Front Brake component is slightly corroded Banjo bolt (3.1.5)

Front suspension assembly slightly corroded. Stancions (2.3.1)

Oil leak ()

Rear spring corroded but not seriously weakened (2.4A1b(ii))

Front Brake disc(s) slightly pitted (3.2.A1l)

Front shock absorber has light misting of stanchion (2.3.3)

Front tyre perishing

Oil leak

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear spring corroded but not seriously weakened (2.4A1b(ii))

Rear tyre perishing

Front Brake disc(s) slightly pitted (3.2.A1l)

Nearside Front suspension assembly slightly corroded. (2.3.1)

Offside Front shock absorber has light misting of stanchion (2.3.3)

Oil leak

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Rear spring corroded but not seriously weakened (2.4A1b(ii))

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Brake disc(s) slightly pitted (3.2.A1l)

Nearside Front suspension assembly slightly corroded. (2.3.1)

Offside Front shock absorber has light misting of stanchion (2.3.3)

Oil leak

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Rear spring corroded but not seriously weakened (2.4A1b(ii))

Front Brake disc(s) slightly pitted (3.2.A1l)

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Front Roller brake test Higher brake efficiency normally obtainable. (3.3.A2b)

Nearside Front suspension assembly slightly corroded. (2.3.1)

Offside Front shock absorber has light misting of stanchion (2.3.3)

Oil leak

Front Brake disc(s) slightly pitted (3.2.A1l)

Offside Front shock absorber has light misting of stanchion (2.3.3)

Oil leak

Exhaust slightly deteriorated (7.1.1a)

Front Brake disc(s) slightly pitted (3.2.A1l)

Exhaust slightly deteriorated (7.1.1a)

Front suspension assembly slightly corroded. (2.3.1)

frame covered in bodywork

Exhaust slightly deteriorated (7.1.1a)

Front suspension assembly slightly corroded. (2.3.1)