MOT Status
ValidMileage
95,417 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake hose has slight corrosion to ferrule Both Rear Hoses (1.1.12 (f) (i))
Lower Suspension spring mounting prescribed area is corroded but not considered excessive Rear Beam Axle (5.3.6 (a) (i))
Nearside Front Position lamp light intensity obviously reduced (4.2.3 (a) (i))
Rear Underside has General Corrosion
Suspension component mounting prescribed area is corroded but not considered excessive Both Rear Inner Mounting Areas (5.3.6 (a) (i))
Horn not working (7.7 (a))
Brake hose has slight corrosion to ferrule Both Rear Hoses (1.1.12 (f) (i))
Lower Suspension spring mounting prescribed area is corroded but not considered excessive Rear Beam Axle (5.3.6 (a) (i))
Nearside Front Position lamp light intensity obviously reduced (4.2.3 (a) (i))
Rear Underside has General Corrosion
Suspension component mounting prescribed area is corroded but not considered excessive Both Rear Inner Mounting Areas (5.3.6 (a) (i))
Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))
Rear brake back plates have corrosion
rear axle has corrosion
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))
Rear brake back plates have corrosion
rear axle has corrosion
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Axle mounting (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Axle mounting (5.3.6 (a) (i))
Front Suspension arm pin or bush worn but not resulting in excessive movement Offside and Nearside lower arm rear bush (5.3.4 (a) (i))
Oil leak, but not excessive Engine (8.4.1 (a) (i))
Rear Tyre slightly damaged/cracking or perishing Offside and Nearside perished (5.2.3 (d) (ii))
Rear axle has heavy corrosion
Rear brake back plates have heavy corrosion
Both rear inner sills are slightly corroded.
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear axle heavily corroded
Front Brake pipe corroded, covered in grease or other material nearside and offside (1.1.11 (c))
Rear Brake pipe corroded, covered in grease or other material nearside and offside (1.1.11 (c))
Rear axle beam has heavy corrosion on it.
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Brake pipe corroded, covered in grease or other material to rear (1.1.11 (c))
Horn not working (7.7 (a))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Brake pipe corroded, covered in grease or other material to rear (1.1.11 (c))
Surface rust on rear of o/s rear of sill
Indicator switch faulty O/s indicator switch (4.4.2 (a) (i))
Rust forming on rear of o/s/r sill
Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))
Offside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Indicator switch faulty O/s indicator switch (4.4.2 (a) (i))
Rust forming on rear of o/s/r sill
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))
Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Rear wheel bearing has slight play (2.6.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
o/s/r tyre cracking on treads
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Offside Rear rear brake binding (3.7.B.1)
Nearside Rear Rear wheel bearing has slight play (2.6.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
o/s/r tyre cracking on treads
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
rear washer blocked
Nearside Rear Inner Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Rear Inner Road wheel with a slightly distorted bead rim (4.2.A.1a)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Offside Front Tyre has ply or cords exposed (4.1.D.1b)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Parking brake lever has little reserve travel (3.1.6b)
nearside front tyre worn on inner and outter edge
both front tyre worn on inner edge
offside rear tyre cracking and worn on outter edge
Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
both front tyre worn on inner edge
exhaust knocking on subframe
offside rear tyre cracking and worn on outter edge
Play in steering rack inner joint(s)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
unable to fully inspect front brakes due to wheel trims
Nearside Front Tyre has ply or cords exposed (4.1.D.1b)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre has ply or cords exposed (4.1.D.1b)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Play in steering rack inner joint(s)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
unable to fully inspect front brakes due to wheel trims
both front tyre outer sidewalls heavily scrubbed.
minor leak from water pump.
How Reliable is the Toyota Aygo?
Based on 3,073,569 MOT tests across 286,185 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
WD08 FJX is a 2008 Toyota Aygo in Red with a 998cc petrol engine. This vehicle has been through 29 MOT tests with a personal pass rate of 58.6%.
Across all 2008 Toyota Aygo models, the average MOT pass rate is 74.7% with a typical mileage of 54,541 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Toyota Aygo fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 33,372 recorded failures. If you're considering buying WD08 FJX, it's worth having these areas checked by a mechanic before committing.
The Toyota Aygo typically stays on UK roads for around 21 years. At 18 years old, this Toyota Aygo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of WD08 FJX?
You can check the full history of WD08 FJX by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was WD08 FJX registered?
WD08 FJX is a 2008 Toyota Aygo, first registered on 26 July 2008.
Is WD08 FJX safe to buy?
The MOT history for WD08 FJX shows 29 tests with a 58.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does WD08 FJX have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on WD08 FJX. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.