2015 Lexmoto Xflm

Brake pedal has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Brake pedal has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))

Drive chain excessively tight (6.1.7 (k) (i))

Headlamp aim not tested (4.1.2 (b))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Headlamp not working on main beam (4.1.1 (a) (ii))

Brake pedal has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

CHAIN GAURD INSECURE

Front Brake pad(s) close to minimum limit (1.1.13 (a))

REAR CHAIN GAURD INSECURE

Drive chain excessively tight (6.1.7 (k) (i))

Handlebar retaining device loose (2.2.1 (b) (i))

Headlamp aim not tested (4.1.2 (b))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Headlamp not working on main beam (4.1.1 (a) (ii))

Motorcycle structure joining/attachment plate or fastening insecure FRONT LOWER FRAME FIXING (6.1.1 (b) (i))

Motorcycle structure joining/attachment plate or fastening insecure REAR LOWER FRAME FIXING (6.1.1 (b) (i))

Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))

Rear Brake excessively binding (1.2.1 (f))

Rear Brake pedal has insufficient reserve travel (1.1.2 (a))

Rear Direction indicator obviously incorrectly positioned REAR LIGHT NON TYPE APPROVED INDECATOR SPACING INCORRECT (4.4.3 (a))

Rear Footrest missing BOTH (6.2.12 (a))

Rear reflector missing (4.8.2 (a) (ii))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Rear Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Brake pedal has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

CHAIN GAURD INSECURE

Front Brake pad(s) close to minimum limit (1.1.13 (a))

REAR CHAIN GAURD INSECURE

Rear Direction indicator insecure (4.4.1 (c) (i))

HANDLE BAR HAS BEEN MODIFIED TO FIT EXISTING CLAMPS

Front Headlamp aim not tested (4.1.2 (b))

Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Front Headlamp not working on main beam (4.1.1 (a) (ii))

Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Handlebar deformed but serviceable (2.2.1 (c) (i))

Rear Shock absorber has a slightly worn bush top bush (5.3.2 (c))

Clutch lever bent so it cannot be readily operated (6.2.7 (b))

Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Clutch lever out of shape

Front Tyre worn close to the legal limit (5.2.3 (e))

Rear Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))