MOT Status
ValidMileage
111,977 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Service brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Front Headlamp aim too high Both sides (4.1.2 (a))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Service brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Central Rear Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
Nearside Front Side repeater slightly discoloured (4.4.3 (a))
Offside Front Side repeater slightly discoloured (4.4.3 (a))
Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure Inner sidewall 165/60/14 (5.2.3 (d) (ii)) DANGEROUS
Central Rear Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
Nearside Front Side repeater slightly discoloured (4.4.3 (a))
Nearside Front Upper Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Side repeater slightly discoloured (4.4.3 (a))
Driver's view Items removed from driver's view prior to test phone holder (3.1 (a) (ii))
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Offside Front Outer Brake pad(s) wearing thin (1.1.13 (a) (ii))
Driver's view Items removed from driver's view prior to test phone holder (3.1 (a) (ii))
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Front Windscreen washer not working (3.5 (a))
Offside Front Outer Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Inner Tyre slightly damaged/cracking or perishing sidewall (5.2.3 (d) (ii))
Offside Rear Inner Tyre slightly damaged/cracking or perishing sidewall (5.2.3 (d) (ii))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front fog lamp inoperative
Nearside Front position lamp(s) not working (1.1.A.3b)
rear wiper blade spilt
BOTH FRONT TYRES WORN LOW ON EDGES
How Reliable is the Hyundai I10?
Based on 2,829,935 MOT tests across 251,032 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
WD62 BVG is a 2013 Hyundai I10 in Red with a 1,248cc petrol engine. This vehicle has been through 17 MOT tests with a personal pass rate of 64.7%.
Across all 2013 Hyundai I10 models, the average MOT pass rate is 78.1% with a typical mileage of 35,671 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Hyundai I10 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 15,951 recorded failures. If you're considering buying WD62 BVG, it's worth having these areas checked by a mechanic before committing.
The Hyundai I10 typically stays on UK roads for around 18 years. At 13 years old, this Hyundai I10 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of WD62 BVG?
You can check the full history of WD62 BVG by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was WD62 BVG registered?
WD62 BVG is a 2013 Hyundai I10, first registered on 22 February 2013.
Is WD62 BVG safe to buy?
The MOT history for WD62 BVG shows 17 tests with a 64.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does WD62 BVG have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on WD62 BVG. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.