1979 Austin Morris Mini 1000

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Exhaust emissions hydrocarbon content excessive (7.3.B.1b)

Hazard warning lamps inoperative (1.4.B.1b)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Stop lamp not working (1.2.1b)

Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone 'A' wipers not parking (8.3.1b)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' wiper not parking (8.3.1e)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive shock absorber mount (2.4.A.3)

broken n/s/r lamp lens

hazard switch worn

Front Suspension has inadequate clearance with the bump stop (2.4.A.1a)

Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Direction indicator not working (1.4.A.2c)

Offside Front Steering locking device insecure (2.2.C.1g)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Registration plate lamp not working (1.1.C.1d)

Front bumper insecure

broken n/s/r lamp lens

front lower arm bushes perished

front suspension ball joint boots deteriorated

front tyres run close to body

hazard switch worn

play at front suspension ball joint(s)

Nearside Headlamp aim too low (1.8)

Offside Headlamp aim too high (1.8)

Offside Rear Radius arm has excessive play in a pin/bearing (2.4.G.2)

Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone 'A' (8.3.1b)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS

as per previous vt32

Brakes imbalanced across an axle (3.7.B.5b)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear wheel bearing rough when rotated (2.6.1)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Subframe mounting prescribed area is deliberately modified which significantly reduces the original strength (2.4.A.3)

Offside Lower Steering pivot point has excessive play (2.2.B.1g)

Offside Rear wheel bearing rough when rotated (2.6.1)

nearside front doorstep corroding †oil filler cap missing †slight engine oil leaks †poor repairs to offside and nearside front floor †rear subframe previously repaired

Vehicle structure has slight corrosion (6.1.A.1)

Exhaust has a major leak of exhaust gases (7.1.2)

Hazard warning switch faulty (1.4.B.1d)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Registration plate lamp not working (1.1.5c)

Semaphore indicator switch faulty (1.4.C.1c)

Semaphore indicator switch insecure (1.4.C.1c)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Offside Front suspension has slight movement at a suspension ball joint (2.5.A.1c)

Hazard warning switch faulty (1.4.B.1d)

Offside Windscreen wiper not operating over a large enough area to give an adequate view (8.2.1c)

Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS

Offside Front suspension has slight movement at a suspension ball joint (2.5.A.1c)

Rear wheel bearing has slight play (2.6.2)