MOT Status
ExpiredMileage
136,156 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear fog lamp not working (4.5.1 (a) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front TYRE WORN ON INNER EDGE
Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front TYRE WORN ON INNER EDGE
Nearside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt Lower both sides (2.4.G.2)
Subframe mounting prescribed area is corroded but not considered excessive General corrosion on chassis (2.4.A.3)
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Rear Subframe mounting prescribed area is excessively corroded Inner sill panel (2.4.A.3)
Tyre tread depth below requirements of 1.6mm Both rear tyres (4.1.E.1)
Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt Lower both sides (2.4.G.2)
Subframe mounting prescribed area is corroded but not considered excessive General corrosion on chassis (2.4.A.3)
Front Brake pad(s) wearing thin (3.5.1g)
Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Front Brake pad(s) wearing thin (3.5.1g)
Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Track rod end ball joint has excessive play (2.2.B.1f)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Headlamp not working on dipped beam (1.7.5a)
Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Track rod end ball joint has slight play (2.2.B.1f)
o/s/f tyre worn on inner band
Nearside Front position lamp(s) not working (1.1.A.3b)
Rear registration plate insecure (6.3.1b)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Front Front position lamp(s) not working (1.1.A.3b)
n/s/r tyre worn to 1.6mm o/s/r tyre worn to 3mm
How Reliable is the Mazda Demio?
Based on 136,409 MOT tests across 10,090 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
WF03 OFG is a 2003 Mazda Demio in Silver with a 1,323cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 59.1%.
Across all 2003 Mazda Demio models, the average MOT pass rate is 74.7% with a typical mileage of 51,132 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda Demio fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 7,070 recorded failures. If you're considering buying WF03 OFG, it's worth having these areas checked by a mechanic before committing.
The Mazda Demio typically stays on UK roads for around 28 years. At 23 years old, this Mazda Demio is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of WF03 OFG?
You can check the full history of WF03 OFG by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was WF03 OFG registered?
WF03 OFG is a 2003 Mazda Demio, first registered on 3 April 2003.
Is WF03 OFG safe to buy?
The MOT history for WF03 OFG shows 22 tests with a 59.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does WF03 OFG have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on WF03 OFG. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.