2005 Ford Transit Connect

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Direction indicator slightly discoloured (4.4.3 (a))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Brake hose has slight corrosion to ferrule both rears (1.1.12 (f) (i))

Suspension component corroded but not seriously weakened all suspension components (5.3.3 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

most components under vehicle corroded

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt clip loose (6.1.7 (g) (ii))

Offside Rear Bumper damaged and likely to cause injury when grazed or contacted end cap missing (6.1.4 (a) (i))

Rear Brakes imbalanced across an axle (1.2.1 (b) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Windscreen washer not working (3.5 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

most components under vehicle corroded

heavy corrosion underbody

brake hose ferrules corroded

heavy corrosion underside but not perforated

Offside Front Anti-roll bar linkage has excessive play in a ball joint drop link (2.4.G.2)

Windscreen washer provides insufficient washer liquid (8.2.3)

brake hose ferrules corroded

heavy corrosion underside but not perforated

Brake hose has slight corrosion to ferrules All rear (3.6.B.4e)

Headlamp deteriorated but light output not reduced Both front (1.7.5a)

Nearside Inner Suspension component mounting prescribed area is corroded but not considered excessive Sills (2.4.A.3)

Offside Inner Suspension component mounting prescribed area is corroded but not considered excessive Sills (2.4.A.3)

Suspension component mounting prescribed area is corroded but not considered excessive Front subframe (2.4.A.3)

Suspension spring mounting prescribed area modified, but not inappropriately Rear beam (2.4.A.3)

Nearside Outer Suspension component mounting prescribed area is excessively corroded Sills (2.4.A.3)

Nearside Outer Suspension component mounting prescribed area is excessively corroded Sills (2.4.A.3)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Windscreen wiper does not clear the windscreen effectively Both front (8.2.2)

Brake hose has slight corrosion to ferrules All rear (3.6.B.4e)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Headlamp deteriorated but light output not reduced Both front (1.7.5a)

Nearside Inner Suspension component mounting prescribed area is corroded but not considered excessive Sills (2.4.A.3)

Offside Inner Suspension component mounting prescribed area is corroded but not considered excessive Sills (2.4.A.3)

Suspension component mounting prescribed area is corroded but not considered excessive Front sub frame (2.4.A.3)

Suspension component mounting prescribed area is corroded but not considered excessive Rear beam (2.4.A.3)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Registration plate lamp not working (1.1.C.1d)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

exhaust corroded.

Nearside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Offside Rear Tyre has ply or cords exposed (4.1.D.1b)

exhaust corroded.

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Front Front wheel bearing rough when rotated (2.5.A.2)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Registration plate lamp not working (1.1.5c)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)