2005 Renault Kangoo

Front Brake disc worn, but not excessively BOTH FRONT INNER (1.1.14 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Front Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Tyre obviously under inflated both (5.2.3 (l))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Steering rack gaiter damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Brake load sensing valve stiff (1.1.17 (c) (ii))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Nearside Steering rack gaiter damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Brake load sensing valve stiff (1.1.17 (c) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive Gearbox (8.4.1 (a) (i))

Brake load sensing valve stiff (1.1.17 (c) (ii))

Central Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Outer Drive shaft joint worn, but not excessively (6.1.7 (c) (i))

Oil leak, but not excessive Gearbox (8.4.1 (a) (i))

Brake load sensing valve stiff (1.1.17 (c) (ii))

Central Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Outer Drive shaft joint worn, but not excessively (6.1.7 (c) (i))

Offside Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))

Oil leak, but not excessive Gearbox (8.4.1 (a) (i))

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Rear rear brake binding (3.7.B.1)

Power steering inoperative (2.3.3a)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Registration plate lamp not working (1.1.C.1d)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Steering rack gaiter split (2.2.D.2d)

Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Registration plate lamp not working (1.1.C.1d)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Parking brake lever has no reserve travel (3.1.6b)

Brake master cylinder fluid level below minimum level (3.6.G.1e)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)