MOT Status
ValidMileage
95,344 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Shock absorbers has a reduced damping effect (5.3.2 (d))
Nearside Front Tyre worn close to legal limit/worn on edge 2.5mm edges worn (5.2.3 (e))
Nearside Obligatory mirror slightly damaged (3.3 (b) (i))
Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Outer Drive shaft joint worn, but not excessively (6.1.7 (c) (i))
Offside Front Tyre worn close to legal limit/worn on edge 3mm edges worn (5.2.3 (e))
Offside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))
Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Rear Coil spring corroded (5.3.1 (b) (i))
Rear Exhaust mounting defective (6.1.2 (a))
Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Suspension arm corroded but not seriously weakened all rear arms upper and lower (5.3.3 (b) (i))
Suspension arm pin or bush worn but not resulting in excessive movement rear trailing arm bushes slightly deteriorated (5.3.4 (a) (i))
Tyre worn close to legal limit/worn on edge rear tyres worn unevenly (5.2.3 (e))
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Nearside Front Lower Suspension arm pin or bush excessively worn inner bushes (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge 2.5mm edges worn (5.2.3 (e))
Nearside Obligatory mirror slightly damaged (3.3 (b) (i))
Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Tyre worn close to legal limit/worn on edge 3mm edges worn (5.2.3 (e))
Offside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))
Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Rear Coil spring corroded (5.3.1 (b) (i))
Rear Exhaust mounting defective (6.1.2 (a))
Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Suspension arm corroded but not seriously weakened all rear arms upper and lower (5.3.3 (b) (i))
Suspension arm pin or bush worn but not resulting in excessive movement rear trailing arm bushes slightly deteriorated (5.3.4 (a) (i))
Tyre worn close to legal limit/worn on edge rear tyres worn unevenly (5.2.3 (e))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Nail in tyre ()
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Rear Parking brake inoperative on one side (1.4.1 (a))
Offside Rear Service brake excessively binding (1.2.1 (f))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Nail in tyre ()
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Tyre slightly damaged worn out of shape (5.2.3 (d) (ii))
Nearside Front Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Tyre slightly damaged worn out of shape (5.2.3 (d) (ii))
Rear Anti-roll bar linkage ball joint has slight play both (5.3.4 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Offside Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))
Offside Rear position lamp no 2 not working
Rear Anti-roll bar linkage ball joint has slight play both (5.3.4 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Suspension arm ball joint dust cover severely deteriorated bothsides (5.3.4 (b) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rearmost (5.3.4 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Suspension arm ball joint dust cover severely deteriorated bothsides (5.3.4 (b) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rearmost (5.3.4 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Rear Brake hose excessively deteriorated (1.1.12 (b) (ii))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))
Nearside Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Nearside Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Nearside rear brake binding (3.7.B.1)
Nearside Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Rear Mechanical brake component has restricted free movement (3.5.1k)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nail in nearside rear tyre
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Seat Leon?
Based on 3,000,659 MOT tests across 265,838 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
WF06 UDU is a 2006 Seat Leon in Blue with a 1,896cc diesel engine. This vehicle has been through 26 MOT tests with a personal pass rate of 65.4%.
Across all 2006 Seat Leon models, the average MOT pass rate is 73.5% with a typical mileage of 85,374 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Seat Leon fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 67,909 recorded failures. If you're considering buying WF06 UDU, it's worth having these areas checked by a mechanic before committing.
The Seat Leon typically stays on UK roads for around 26 years. At 20 years old, this Seat Leon is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of WF06 UDU?
You can check the full history of WF06 UDU by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was WF06 UDU registered?
WF06 UDU is a 2006 Seat Leon, first registered on 27 April 2006.
Is WF06 UDU safe to buy?
The MOT history for WF06 UDU shows 26 tests with a 65.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does WF06 UDU have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on WF06 UDU. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.