MOT Status
ValidMileage
156,881 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill area (7.1.1 (a) (i))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))
Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill area (6.1.1 (c) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Windscreen washer not working (3.5 (a))
Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Integral body structure is corroded but structural rigidity is not significantly reduced sill area (6.1.1 (c) (i))
Windscreen washer not working (3.5 (a))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Integral body structure is corroded but structural rigidity is not significantly reduced sill area (6.1.1 (c) (i))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Front Exhaust emissions likely to be affected by an exhaust leak (8.2.2.1 (b))
Nearside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))
Offside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Rear Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i))
Windscreen washer not working (3.5 (a))
Nearside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Offside Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill area (6.1.1 (c) (i))
Emissions unable to be completed due to exhaust leak (8.2.1.2 (d))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Front Exhaust has a major leak of exhaust gases at downpipe (6.1.2 (a))
Nearside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))
Nearside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))
Offside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Nearside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Offside Rear Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected axle mount (5.3.6 (a) (ii)) DANGEROUS
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Nearside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Oil leak, but not excessive Engine (8.4.1 (a) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Exhaust has a minor leak of exhaust gases join (6.1.2 (a))
Both front headlamps fading, making aims weak
Both rear coil springs corroding
Exhaust corroding
Nearside Front tyre on 3mm
Offside Front lower suspension arm rear bush starting to split
Underbody undersealed
Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))
Both front headlamps fading, making aims weak
Both rear coil springs corroding
Exhaust corroding
Nearside Front tyre on 3mm
Offside Front lower suspension arm rear bush starting to split
Underbody undersealed
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))
Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Stop lamp not working (1.2.1b)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front wheel bearing has excessive play (2.5.A.3c)
Offside Front wheel bearing rough when rotated (2.5.A.2)
Offside Rear Stop lamp not working (1.2.1b)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear wheel bearing rough when rotated (2.6.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Headlamp deteriorated but light output not reduced (1.7.5a)
Offside Front Headlamp deteriorated but light output not reduced (1.7.5a)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Headlamp deteriorated but light output not reduced (1.7.5a)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Headlamp deteriorated but light output not reduced (1.7.5a)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
rear silencer hanger deteriorated
Rear Exhaust hangers corroded.
Rear Exhaust hangers corroded.
Tyre worn close to the legal limit (4.1.E.1)
Near side rear tyre perishing.
How Reliable is the Peugeot 107?
Based on 2,229,410 MOT tests across 139,779 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
WF06 WHD is a 2006 Peugeot 107 in Black with a 998cc petrol engine. This vehicle has been through 27 MOT tests with a personal pass rate of 66.7%.
Across all 2006 Peugeot 107 models, the average MOT pass rate is 72.9% with a typical mileage of 58,420 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 107 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 42,280 recorded failures. If you're considering buying WF06 WHD, it's worth having these areas checked by a mechanic before committing.
The Peugeot 107 typically stays on UK roads for around 21 years. At 20 years old, this Peugeot 107 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of WF06 WHD?
You can check the full history of WF06 WHD by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was WF06 WHD registered?
WF06 WHD is a 2006 Peugeot 107, first registered on 30 April 2006.
Is WF06 WHD safe to buy?
The MOT history for WF06 WHD shows 27 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does WF06 WHD have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on WF06 WHD. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.