2008 Toyota Aygo

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Integral body structure is repaired but structural rigidity is not significantly reduced (6.1.1 (d) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))

Brake hose has slight corrosion to ferrule All flexible brake hoses (1.1.12 (f) (i))

Exhaust has a minor leak of exhaust gases At rear and front pipe corroded (6.1.2 (a))

Integral body structure is corroded but structural rigidity is not significantly reduced General underside corrosion, rear underside more advanced. Has had some patch repair work done previously. (6.1.1 (c) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material Corroded (1.1.11 (c))

Offside Brake pipe corroded, covered in grease or other material Front to rear corroded at rear end (1.1.11 (c))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Brake pipe excessively corroded Front to rear pipe, at rear end (1.1.11 (c))

Offside Headlamp has a product on the lens so that the light output is severely reduced Lens crazed (4.1.4 (b))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Brake hose has slight corrosion to ferrule All flexible brake hoses (1.1.12 (f) (i))

Exhaust has a minor leak of exhaust gases At rear and front pipe corroded (6.1.2 (a))

Integral body structure is corroded but structural rigidity is not significantly reduced General underside corrosion, rear underside more advanced. Has had some patch repair work done previously. (6.1.1 (c) (i))

Nearside Headlamp lens slightly defective Lens crazed, pattern just acceptable (4.1.1 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material Corroded (1.1.11 (c))

Offside Brake pipe corroded, covered in grease or other material Front to rear corroded at rear end (1.1.11 (c))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Wheel bearing slightly noisy surface corrosion front subframe,inner sills,rear axle,mountings,rear chassis,boot floor,rear crossmember (5.1.3 (b) (i))

Offside Front Inner Road wheel slightly distorted (5.2.2 (c) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

both front tyres wearing low

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Wheel bearing slightly noisy surface corrosion front subframe,inner sills,rear axle,mountings,rear chassis,boot floor,rear crossmember (5.1.3 (b) (i))

Offside Front Inner Road wheel slightly distorted (5.2.2 (c) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

headlights faded

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Headlamp has a product on the lens but not seriously reducing light output on both sides of vehicle (4.1.4 (b))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Front Upper Road wheel badly distorted (5.2.2 (c) (i))

Rear Rear fog lamp not working (4.5.1 (a) (ii))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Headlamp has a product on the lens but not seriously reducing light output on both sides of vehicle (4.1.4 (b))

Nearside Rear Inner Road wheel slightly distorted and offside front (5.2.2 (c) (i))

Nearside Rear Tyre has a cut but not deep enough to reach the ply or cords in tred (5.2.3 (d) (i))

Rear Outer Tyre worn close to legal limit/worn on edge edges on both sides of vehicle (5.2.3 (e))

Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure perished and cords visible (5.2.3 (d) (ii)) DANGEROUS

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Nail in tyre ()

Offside Rear Nail in tyre ()

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

nearside front tyre worn on edges

nearside rear tyre perished

offside front tyre worn on inner edge

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

slight noise from osr wheel

Nearside Rear Subframe mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Offside Rear Subframe mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

slight noise from osr wheel

Items removed from driver's view prior to test

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

leak from water pump

n/s/r tyre worn inner edges

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)