2012 Kia Rio

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive axle (5.3.6 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive axle (5.3.6 (a) (i))

Nearside Front Inner Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Headlamp lens slightly defective lens bloom/cracked (4.1.1 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Headlamp lens slightly defective lens bloom/cracked (4.1.1 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Offside Side repeater not working (4.4.1 (a) (ii))

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Registration plate deteriorated but not likely to be misread cracked and deteriorated (0.1 (b))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output cracked /len bloom (4.1.4 (b))

Nearside Front Tyre worn close to legal limit/worn on edge inside edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge inside edge (5.2.3 (e))

Offside Rear Headlamp has a product on the lens but not seriously reducing light output cracked / len bloom (4.1.4 (b))

Offside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Side repeater lens defective which has no effect on emitted light (4.4.1 (b) (i))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Headlamp aim not tested (4.1.2 (b))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Inner Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

Offside Side repeater lens defective which has no effect on emitted light (4.4.1 (b) (i))

Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Front Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm (5.2.3 (e)) DANGEROUS

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Inner Rear position lamp(s) not working (1.1.A.3b)