2013 Qingqi Qm 125 GY-2B

Front Tyre worn close to the legal limit (5.2.3 (e))

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Lower Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Headlamp aim too low (4.1.2 (a))

Rear Upper Shock absorber has an excessively worn bush or loose (5.3.2 (c))

Front Tyre worn close to the legal limit (5.2.3 (e))

Chain guard missing

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Nearside Front Direction indicator light intensity reduced 2 leds not working (4.4.3 (a))

Rear Lower Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Headlamp aim too low (4.1.2 (a))

Nearside Front Footrest insecure pivot bolt locking device missing (6.2.12 (a))

Nearside Rear Footrest missing (6.2.12 (a))

Offside Front Footrest insecure pivot locking device missing (6.2.12 (a))

Offside Rear Footrest missing (6.2.12 (a))

Rear reflector missing (4.8.2 (a) (ii))

Registration plate does not conform to the specified requirements (0.1 (d))

Rear Brake fluid reservoir fluid not visible (1.1.10 (d) (iii)) DANGEROUS

Chain guard missing

Nearside Front Direction indicator with a multiple light source up to 1/2 not functioning (4.4.1 (a) (i))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Wheel bearing has slight play (5.1.3 (a) (i))

Indicator tell tale inoperative (4.9.1 (a) (i))

main beam tell tale not working

Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Wheel bearing has slight play (5.1.3 (a) (i))

Indicator tell tale inoperative (4.9.1 (a) (i))

main beam tell tale not working

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Rear Rear reflector obviously incorrectly positioned (4.8.2 (a) (i))

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Rear Upper Suspension rod pin, bush or joint worn but not resulting in excessive movement shock bush (5.3.4 (a) (i))

Rear reflector obviously incorrectly positioned (4.8.2 (a) (i))

Front Wheel bearing has excessive play (5.1.3 (a) (i))

Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Upper Suspension rod pin or bush excessively worn shock bush (5.3.4 (a) (i))

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Rear reflector obviously incorrectly positioned (4.8.2 (a) (i))

Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Suspension component pin or bush excessively worn rear shock (5.3.4 (a) (i))

Drive chain worn to excess (6.1.7 (c) (i))

Nearside Rear All direction indicators not working (4.4.1 (a) (ii))

Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Rear Drive chain sprocket excessively loose (6.1.7 (c) (i))

Rear Shock absorber has negligible damping effect (5.3.2 (b))

Rear Wheel spoke excessively loose (5.2.2 (d))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Front Brake lever not releasing correctly (1.1.2 (b) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Drive chain worn but not considered excessive (6.1.7 (c) (i))

Drive chain slightly loose (6.2.1d)

Drive chain sprocket slightly worn (6.2.1e)

Drive chain worn but not considered excessive (6.2.1e)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Tyre worn close to the legal limit (4.1.3(ii))