2013 Mazda MPV

Central Exhaust has a major leak of exhaust gases (6.1.2 (a))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Fuel cap/sealing device ineffective (6.1.3 (b) (i))

Nearside Front Service brake lagging in operation (1.2.1 (d))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Rear Anti-roll bar pin or bush excessively worn both inner D bushes (5.3.4 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge low on inner edge & cracking (5.2.3 (e))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Offside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Windscreen wiper does not clear the windscreen effectively both (3.4 (b) (ii))

Offside Rear Tyre worn close to legal limit/worn on edge low on inner edge & cracking (5.2.3 (e))

Offside Rear fog lamp does not emit a steady red light (4.5.4 (a))

Nearside Front Lower Suspension arm ball joint likely to become detached (5.3.4 (a) (ii)) DANGEROUS

Nearside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Inner Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Both front track rod dust covers deteriorated

Front headlamp images poor

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Front Suspension arm ball joint dust cover deteriorated

Offside Rear Rear fog lamp does not emit a steady red light white (4.5.4 (a))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Both front track rod dust covers deteriorated

Front headlamp images poor

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Front Suspension arm ball joint dust cover deteriorated

Nearside Front track rod dust cover deteriorated

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear fog lamp does not emit a steady red light (4.5.4 (a))

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear fog lamp emits a light other than red (1.3.2e)

Nearside Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Rear Brake pad(s) wearing thin (3.5.1g)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

nearside rear light unit cracked

offside rear fog light dis colored

Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Rear fog lamp emits a light other than red (1.3.2e)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Rear Tyre has ply or cords exposed (4.1.D.1b)

Nearside Stop lamp not working (1.2.1b)