2003 Mazda MPV

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear bumper bracket rusted

Rear chassis and sills rusted

Rear chassis and both outer sills rusted

Slight O/S/F brake bind

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

corrosion to inner/outer sills+rear suspension mountings+rear chassis rails

parts of exhaust in poor condition and one mounting broken

some rear brake imbalance

Nearside Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Rear Shock absorber has a serious fluid leak (2.7.3)

Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

corrosion to inner/outer sills+rear suspension mountings+rear chassis rails

parts of exhaust in poor condition and one mounting broken

some rear brake imbalance

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Rear Vehicle structure has slight corrosion (6.1.A.1)

exhaust deteriated

rear crossmember corroded

Front front brake binding (3.7.B.1)

Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Track rod end ball joint has excessive play (2.2.B.1f)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Vehicle structure has slight corrosion (6.1.A.1)

exhaust deteriated

rear crossmember corroded

Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Shock absorber has slight external damage to the casing (2.7.2a)

front brake imbalance 25%

front brakes binding

front number plate slightly insecure

part of exhaust in slightly poor condition

some corrosion to rear suspension mounts+outer sills+rear wheel arches

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front position lamp(s) not working (1.1.A.3b)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Shock absorber has slight external damage to the casing (2.7.2a)

front brakes binding

front number plate slightly insecure

part of exhaust in slightly poor condition

some corrosion to rear suspension mounts+outer sills+rear wheel arches

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

slight binding on front brakes

Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

slight binding on front brakes

Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

centre rear exhaust mount slightly insecure

rear metal heater pipes very rusty

Nearside Front position lamp(s) not working (1.1.A.3b)

Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

centre rear exhaust mount slightly insecure

rear metal heater pipes very rusty

Front brake disc slightly pitted (3.5.1h)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

rear heater tubes under floor in very poor condition

screw in nearside rear tyre

Tyre worn close to the legal limit (4.1.E.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

lot of corrosion to rear heater pipes

rear brake application is slightly uneven

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)