2004 Honda CBR125R

Front Direction indicator missing (1.5.1a)

Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride Drive chain link (6.2.1h)

Rear Direction indicator missing (1.5.1a)

Drive chain slightly loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Front Brake fluid reservoir fluid level low (3.2.B1d)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Clutch lever bent (6.2.1g)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Fairings insecure but not likely to impede the steering (2.1.2e)

Front Tyre valve stem slightly damaged (4.1.2c)

Front Tyre worn close to the legal limit (4.1.3(ii))

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

front tyre wall cracking

n/s foot rest rubber split

part of the clutch lever housing missing

Clutch lever bent (6.2.1g)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Fairings insecure but not likely to impede the steering (2.1.2e)

Front Tyre valve stem slightly damaged (4.1.2c)

Front Tyre worn close to the legal limit (4.1.3(ii))

front tyre wall cracking

n/s foot rest rubber split

part of the clutch lever housing missing

Offside Steering control has reduced clearance at full lock not affecting the riders grasp of handlebars (2.1.2b)

Front Floor brake test indicates a binding brake (3.3.C2c)

Drive chain slightly loose (6.2.1d)

Front Tyre worn close to the legal limit (4.1.3(ii))

Steering headbearing has slight free play (2.2.2)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Tyre has a tear caused by separation or partial failure of its structure (4.1.2a(ii))