2005 Mercedes-benz Clk

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Headlamp lens slightly defective Cloudy (4.1.1 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge On 3mm (5.2.3 (e))

Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b))

Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Headlamp lens slightly defective Cloudy (4.1.1 (b) (i))

Front Brake disc worn, but not excessively both front discs worn (1.1.14 (a) (i))

Front Brake pad(s) wearing thin both sides front pads wearing low (1.1.13 (a) (ii))

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords cut in outer sidewall (5.2.3 (d) (i))

Stop lamp(s) non-obligatory stop lamp not working high level not working (4.3.1 (a) (ii))

Central Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Central Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

centre brake light

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Direction indicator slightly discoloured (1.4.A.2f)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

front and rear brake discs slightly corroded

Offside Stop lamp not working (1.2.1b)

Nearside Rear Direction indicator slightly discoloured (1.4.A.2f)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

front and rear brake discs slightly corroded

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Offside Front Direction indicator slightly discoloured (1.4.A.2f)

Offside Front wheel bearing has slight play (2.5.A.3c)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Offside Front Lower Suspension arm has excessive play in a ball joint rear (2.4.G.2)

Offside Rear Direction indicator incorrect colour (1.4.A.2f)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Offside Front Direction indicator slightly discoloured (1.4.A.2f)

Offside Front wheel bearing has slight play (2.5.A.3c)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Front wheel bearing has slight play (2.5.A.3c)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Front wheel bearing has slight play (2.5.A.3c)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Engine covers fitted obscuring some components in the engine bay

Nearside Front wheel bearing has slight play (2.5.A.3c)

Offside Front wheel bearing has slight play (2.5.A.3c)

Under-trays fitted obscuring some underside components

front discs slightly lipped

Child seat fitted not allowing full inspection of adult belt

Engine covers fitted obscuring some components in the engine bay

Nearside Front wheel bearing has slight play (2.5.A.3c)

Offside Front wheel bearing has slight play (2.5.A.3c)

Under-trays fitted obscuring some underside components

childs seat insecure

front discs slightly lipped

Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Lower Suspension arm has excessive play in a pin/bush (2.4.G.2)

Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Suspension joint offside lower dust cover split/missing

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)