2006 Peugeot 107

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle mount (5.3.6 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle mount (5.3.6 (a) (i))

rear axle/beam corroded

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Rear fog lamp switch not operating in accordance with the requirements (4.5.3 (a))

Offside Rear Service brake excessively binding (1.2.1 (f))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))

Nearside Headlamp has a product on the light source but not seriously reducing light output (4.1.4 (b))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))

Offside Headlamp has a product on the light source but not seriously reducing light output (4.1.4 (b))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Rear Suspension component corroded but not seriously weakened Axle beam (5.3.3 (b) (i))

Horn not working (7.7 (a))

Nearside Headlamp aim too low (4.1.2 (a))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))

Nearside Headlamp has a product on the light source but not seriously reducing light output (4.1.4 (b))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))

Offside Headlamp has a product on the light source but not seriously reducing light output (4.1.4 (b))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Rear Suspension component corroded but not seriously weakened Axle beam (5.3.3 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Exhaust mounting defective (6.1.2 (a))

corrosion forming on offside and nearside rear inner sill and rear chassis leg areas

front and rear suspension components corroded

offside and nearside headlight beam patterns poor

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Exhaust mounting defective (6.1.2 (a))

corrosion forming on offside and nearside rear inner sill areas

front and rear suspension components corroded

offside and nearside headlight beam patterns poor

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Exhaust mounting defective (6.1.2 (a))

corrosion forming on offside and nearside rear inner sill areas

front and rear suspension components corroded

offside and nearside headlight beam patterns poor

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Exhaust mounting defective (6.1.2 (a))

Horn not working (1.6.2a)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit 2.5 mm (4.1.E.1)

Offside Front Tyre worn close to the legal limit 3.0 mm (4.1.E.1)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

reay exhaust braket corroded

front discs worn and corroded