2009 Fiat 500

Front Inner Signs of corrosion

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Brake hose slightly twisted (1.1.12 (b) (i))

Offside Rear Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Front Lower Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Brake hose leaking on a hydraulic braking system (1.1.12 (c) (ii)) DANGEROUS

Front Inner Signs of corrosion

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Brake hose slightly twisted (1.1.12 (b) (i))

Offside Rear Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Upper Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Brake disc worn, pitted or scored, but not seriously weakened Both (1.1.14 (a) (ii))

Nearside Front Macpherson strut corroded and seriously weakened Also some play in top mount (5.3.3 (b) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened Both (1.1.14 (a) (ii))

Central exhaust system corroded

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Shock absorbers has slight external damage to the casing corroded (5.3.2 (b))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring cup holed (5.3.6 (a) (i))

Central exhaust system corroded

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Shock absorbers has slight external damage to the casing corroded (5.3.2 (b))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

rear axle beam becoming corroded

Nearside Parking brake inoperative on one side (1.4.1 (a))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

rear axle beam becoming corroded

Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

both rear tyres perished

corrosion exhaust system, rear clamp missing

low parking brake reading nearside rear

slight uneven service brake application between fronts

Items removed from driver's view prior to test ()

Nearside Front Macpherson strut mounting corroded but not seriously weakened retaining cup corroding (5.3.3 (b) (i))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear parking brake has low effort

Offside Front Macpherson strut mounting corroded but not seriously weakened retaining cup corroding (5.3.3 (b) (i))

Rear Suspension component corroded but not seriously weakened axle beam/radius arms nearside and offside (5.3.3 (b) (i))

park brake efficiency on limit of 16%

Nearside Front Valve stem slightly damaged (5.2.3 (j))

Rear exhaust silencer getting weak, also joint clamp missing

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Rear Brakes imbalanced across an axle (1.2.1 (b) (i))

Nearside Front Valve stem slightly damaged (5.2.3 (j))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Rear exhaust silencer getting weak, also joint clamp missing

Items removed from driver's view prior to test ()

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

exhaust rear silencer getting weak

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside rear brake binding (3.7.B.1)

Items removed from driver's view prior to test ()

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

exhaust rear silencer getting weak

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

nsf worn on inner