2002 Mazda 6

Front Front position lamp(s) not working both (1.1.A.3b)

Nearside Front Road wheel bead rim badly distorted (4.2.A.1a)

Nearside Rear Inner Subframe mounting prescribed area is excessively corroded sill/wheel arch (2.4.A.3)

Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)

Offside Outer Seat belt anchorage prescribed area is excessively corroded sill from front to rear (5.2.6)

Offside Rear Inner Subframe mounting prescribed area is excessively corroded sill/wheel arch (2.4.A.3)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Body has a sharp edge caused by corrosion wing/wheelarch (6.1.C.1)

Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill/wheelarch (2.4.A.3)

Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill/wheelarch (2.4.A.3)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Windscreen has damage to an area in excess of a 10mm circle within zone 'A' wiper marks (8.3.1a)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp aim too low (1.8)

Offside Rear Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Parking brake: efficiency below requirements (3.7.C.1b)

Service brake: efficiency below requirements (3.7.C.1a)

Front registration plate delaminated but not likely to be misread (6.3.1d)

Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement all bushes (2.4.G.2)

Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement all bushes (2.4.G.2)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Rear registration plate delaminated but not likely to be misread (6.3.1d)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

both inner sills corroding

both rear suspension arms corroding

Front registration plate insecure (6.3.1b)

Registration plate lamp not working (1.1.C.1d)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

both inner sills corroding

both rear suspension arms corroding

n/s/r brake disc corroded

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

n/side and o/side rear inner sill as corrosion

Rear exaust flange in very poor condition.

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Surface corrosion on all rear suspention compounants.

Offside Rear Lower Trailing arm which is adjustable, locking device missing (2.4.G.1)

Front Brake pad(s) wearing thin (3.5.1g)

Rear exaust flange in very poor condition.

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Surface corrosion on all rear suspention compounants.

Engine covers fitted obscuring some components in the engine bay

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Items removed from driver's view prior to test

Nearside Rear Upper Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Upper Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

rear exhaust deteriorated at joint

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Headlamp not working on dipped beam (1.7.5a)

Engine covers fitted obscuring some components in the engine bay

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Items removed from driver's view prior to test

Nearside Rear Upper Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Upper Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

nearside wiper arm requires adjusting on spindle

rear exhaust deteriorated at joint

Rear Brake pad(s) wearing thin (3.5.1g)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Headlamp aim too high (1.8)

Offside Headlamp aim too high (1.8)

Offside Headlamp aim too low (1.8)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Registration plate lamp not working (1.1.5c)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Brake hose slightly deteriorated (3.6.B.4d)

Rear Brake pad(s) wearing thin (3.5.1g)

exhaust system very rusty

Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)