MOT Status
ValidMileage
78,481 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Underbody Undersealed
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Front tyres perishing
Offside Front side bulb inop
Central Vehicle structure is repaired but structural rigidity is not significantly reduced COVERED IN UNDERSEAL (6.1.1 (d) (i))
Offside Front Vehicle structure is repaired but structural rigidity is not significantly reduced COVERED IN UNDERSEAL (6.1.1 (d) (i))
Offside Rear Vehicle structure is repaired but structural rigidity is not significantly reduced COVERED IN UNDERSEAL (6.1.1 (d) (i))
Central Integral body structure is fractured and structural rigidity is significantly reduced n/s/ central mark in yellow choke (6.1.1 (a) (i))
Offside Front Integral body structure is deformed and structural rigidity is significantly reduced mark in yellow choke (6.1.1 (a) (i))
Offside Rear Integral body structure is deformed and structural rigidity is significantly reduced mark in yellow choke (6.1.1 (a) (i))
Brake hose has slight corrosion to ferrule All (1.1.12 (f) (i))
Brake pipe corroded, covered in grease or other material All (1.1.11 (c))
Coil spring corroded All (5.3.1 (b) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive Inner sill (7.1.1 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Shock absorbers has slight external damage to the casing All coroded (5.3.2 (b))
Exhaust system insecure (6.1.2 (a))
Brake hose has slight corrosion to ferrule All (1.1.12 (f) (i))
Brake pipe corroded, covered in grease or other material All (1.1.11 (c))
Coil spring corroded All (5.3.1 (b) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive Inner sill (7.1.1 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Shock absorbers has slight external damage to the casing All coroded (5.3.2 (b))
Brake pipe corroded, covered in grease or other material All (1.1.11 (c))
Nearside Front Coil spring corroded (5.3.1 (b) (i))
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive Inner sill (7.1.1 (a) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Exhaust mounting defective (6.1.2 (a))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill (7.1.1 (a) (i))
Offside Front Service brake lagging in operation (1.2.1 (d))
Windscreen washer not working (3.5 (a))
Brake pipe corroded, covered in grease or other material All (1.1.11 (c))
Nearside Front Coil spring corroded (5.3.1 (b) (i))
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive Inner sill (7.1.1 (a) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Exhaust mounting defective (6.1.2 (a))
Brake pipe corroded, covered in grease or other material rear pipes greased (1.1.11 (c))
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive inner sill (7.1.1 (a) (i))
Nearside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Nearside Rear Lower Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive inner sill (7.1.1 (a) (i))
Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Rear Lower Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Central Rear Seat belt anchorage prescribed area strength or continuity significantly reduced boot floor (7.1.1 (a) (i))
Brake pipe corroded, covered in grease or other material rear pipes greased (1.1.11 (c))
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive inner sill (7.1.1 (a) (i))
Nearside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Nearside Rear Lower Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive inner sill (7.1.1 (a) (i))
Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Rear Lower Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
chassis corroded
front bumper damaged
Front Brake pad(s) worn down to wear indicator (1.1.13 (a) (i))
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
chassis corroded
front bumper damaged
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
chassis corroded
Nearside Front Brake hose excessively twisted (1.1.12 (b) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
chassis corroded
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front coil spring corroded (2.4.C.1b)
Offside Front coil spring corroded (2.4.C.1b)
both front tractor joints leaking
Nearside Front Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Nearside Front Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front coil spring corroded (2.4.C.1b)
Offside Front coil spring corroded (2.4.C.1b)
both front tractor joints leaking
Front Headlamp has a product on the lens but not seriously reducing light output both (1.7.5a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Front Headlamp has a product on the lens but not seriously reducing light output both (1.7.5a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Offside Front coil spring corroded (2.4.C.1b)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Headlamp aim too high (1.8)
Offside Front coil spring corroded (2.4.C.1b)
Offside Headlamp aim too high (1.8)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Exhaust has part of the system slightly deteriorated (7.1.1a)
NEARSIDE FRONT TYRE wearing on outer edge.
How Reliable is the Suzuki Jimny?
Based on 677,512 MOT tests across 43,507 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
WG05 HBF is a 2005 Suzuki Jimny in Silver with a 1,298cc petrol engine. This vehicle has been through 29 MOT tests with a personal pass rate of 65.5%.
Across all 2005 Suzuki Jimny models, the average MOT pass rate is 75.7% with a typical mileage of 55,000 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Suzuki Jimny fails its MOT is brake pipe excessively corroded, accounting for 18,210 recorded failures. If you're considering buying WG05 HBF, it's worth having these areas checked by a mechanic before committing.
The Suzuki Jimny typically stays on UK roads for around 28 years. At 21 years old, this Suzuki Jimny is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of WG05 HBF?
You can check the full history of WG05 HBF by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was WG05 HBF registered?
WG05 HBF is a 2005 Suzuki Jimny, first registered on 2 June 2005.
Is WG05 HBF safe to buy?
The MOT history for WG05 HBF shows 29 tests with a 65.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does WG05 HBF have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on WG05 HBF. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.