MOT Status
ValidMileage
115,304 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake pipe corroded, covered in grease or other material Front to rear pipes, rear sections. Nearside and Offside (1.1.11 (c))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Rear tyres starting to crack / perish
Some corrosion to underbody, steering and suspension components
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Brake pipe corroded, covered in grease or other material FRONT TO REAR (1.1.11 (c))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Headlamp lens seriously defective (4.1.1 (b) (ii))
Indicator switch inoperative (4.4.2 (a) (ii))
Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Seat belt anchorage prescribed area strength or continuity significantly reduced NEARSIDE SILL (7.1.1 (a) (i))
Brake pipe corroded, covered in grease or other material FRONT TO REAR (1.1.11 (c))
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front shock absorbers corroded
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))
Nearside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))
Front shock absorbers corroded
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Stop lamp(s) with a multiple light source up to 1/2 not functioning high level (4.3.1 (a) (i))
Nearside Headlamp aim too high (4.1.2 (a))
Nearside Headlamp not working on main beam (4.1.1 (a) (ii))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Stop lamp(s) with a multiple light source up to 1/2 not functioning high level (4.3.1 (a) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e))
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge wearing on inner edge (5.2.3 (e))
Nearside Rear Tyre worn close to legal limit/worn on edge close to limit (5.2.3 (e))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge wearing on inner edge (5.2.3 (e))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge wearing on inner edge (5.2.3 (e))
Nearside Headlamp aim too high (4.1.2 (a))
Nearside Rear Tyre worn close to legal limit/worn on edge close to limit (5.2.3 (e))
Offside Front Headlamp aim too high (4.1.2 (a))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge wearing on inner edge (5.2.3 (e))
Offside Rear Brake pipe corroded, covered in grease or other material corroded (1.1.11 (c))
boot floor spare wheel location fractured / cracked
Emissions not tested exhaust leaking (8.2.1.2 (d))
Exhaust emissions likely to be affected by an exhaust leak centre to rear connection (8.2.1.1 (b))
Nearside Front Body panel damaged and likely to cause injury wing / door gap , damage to front bumper corner and wing (6.2.1 (a) (i))
Offside Front Position lamp not working (4.2.1 (a))
Registration plate lamp inoperative in the case of a single lamp or all lamps both n/s & o/s (4.7.1 (b) (ii))
Offside Rear Brake pipe corroded, covered in grease or other material corroded (1.1.11 (c))
boot floor spare wheel location fractured / cracked
Exhaust has a minor leak of exhaust gases centre to rear connection (7.1.2)
Items removed from driver's view prior to test hanging from the rear view mirror
Offside Front Tyre worn close to the legal limit wearing on the inner edge (4.1.E.1)
Nearside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement rear bush (2.4.G.2)
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement rear bush (2.4.G.2)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Headlamp aim too high (1.8)
Exhaust has a minor leak of exhaust gases centre to rear connection (7.1.2)
Items removed from driver's view prior to test hanging from the rear view mirror
Offside Front Tyre worn close to the legal limit wearing on the inner edge (4.1.E.1)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Front Brake pad(s) wearing thin (3.5.1g)
Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Peugeot 107?
Based on 2,229,410 MOT tests across 139,779 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
WG06 BWA is a 2006 Peugeot 107 in Black with a 998cc petrol engine. This vehicle has been through 25 MOT tests with a personal pass rate of 72%.
Across all 2006 Peugeot 107 models, the average MOT pass rate is 72.9% with a typical mileage of 58,420 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 107 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 42,280 recorded failures. If you're considering buying WG06 BWA, it's worth having these areas checked by a mechanic before committing.
The Peugeot 107 typically stays on UK roads for around 21 years. At 20 years old, this Peugeot 107 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of WG06 BWA?
You can check the full history of WG06 BWA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was WG06 BWA registered?
WG06 BWA is a 2006 Peugeot 107, first registered on 15 May 2006.
Is WG06 BWA safe to buy?
The MOT history for WG06 BWA shows 25 tests with a 72% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does WG06 BWA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on WG06 BWA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.