2006 Land Rover Defender

Suspension component mounting prescribed area is corroded but not considered excessive Both rear chassis rails and box section (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive Both rear chassis rails (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive Rear box section/chassis (5.3.6 (a) (i))

Offside Front Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

engine cover fitted

exhaust slightly corroded

Windscreen wiper not working (3.4 (a))

Front Registration plate insecure (0.1 (a))

Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Rear Suspension arm ball joint excessively worn A frame (5.3.4 (a) (i))

Windscreen washer not working (3.5 (a))

engine cover fitted

exhaust slightly corroded

Offside Front Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Obligatory mirror slightly damaged (3.3 (b) (i))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Hub seal has a slight seepage.

Rear diff mount ball joint dust cover deteriorated but still prevents the ingress of dirt.

Brake pipe excessively corroded Front to rear at centre. (1.1.11 (c))

Nearside Front Position lamp not working (4.2.1 (a))

Nearside Rear Position lamp not working (4.2.1 (a))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Front Headlamp aim not tested (4.1.2 (b))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Hub seal has a slight seepage.

Rear diff mount ball joint dust cover deteriorated but still prevents the ingress of dirt.

Nearside Front Front wheel bearing has slight play (2.5.A.3c)

Nearside Rear Shock absorber has a slightly worn bush Upper & Lower (2.7.4)

Offside Rear Shock absorber has a slightly worn bush Upper & Lower (2.7.4)

Centre Brake pipe slightly corroded (3.6.B.2c)

Main beam 'tell-tale' not working (1.7.4c)

Nearside Front wheel bearing has excessive play (2.5.A.3c)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Headlamp not working on main beam (1.7.5a)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Headlamp not working on main beam (1.7.5a)

Offside Rear fog lamp not working (1.3.2b)

Rear fog lamp tell tale not working (1.3.1b)

Brake pedal anti-slip provision missing (3.3.A.1b)

Nearside Front Front wheel bearing rough when rotated (2.5.A.2)

Nearside Rear Trailing arm rubber mounting bonding deteriorated resulting in excessive movement (2.4.G.2)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Trailing arm rubber mounting bonding deteriorated resulting in excessive movement (2.4.G.2)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Registration plate lamp not working (1.1.C.1d)

Offside Headlamp insecure (1.7.3)

Registration plate lamp not working (1.1.C.1d)

Nearside Rear Trailing arm rubber mounting bonding deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm rubber mounting bonding deteriorated resulting in excessive movement (2.4.G.2)