MOT Status
ExpiredMileage
116,267 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))
Offside Rear Suspension arm pin or bush excessively worn trailing bush (5.3.4 (a) (i))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Rear fog lamp not working (4.5.1 (a) (ii))
Nearside Rear Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing bush (5.3.4 (a) (i))
Nearside Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Track rod end ball joint has slight play (2.1.3 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
All direction indicators slightly discoloured ALL (4.4.3 (a))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Outer both sills heavily sprayed
Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Position lamp not working both (4.2.1 (a) (ii))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))
Nearside Front Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
All direction indicators slightly discoloured ALL (4.4.3 (a))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Windscreen washer provides insufficient washer liquid (3.5 (a))
Nearside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Outer both sills heavily sprayed
Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Outer Vehicle structure is corroded but structural rigidity is not significantly reduced Sills (6.1.1 (c) (i))
Offside Outer Vehicle structure is corroded but structural rigidity is not significantly reduced Sills (6.1.1 (c) (i))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))
Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Front Tyre worn close to legal limit/worn on edge b0th (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
corrosion to front and rear subframes
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
corrosion to front and rear subframes
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill holed and corroded (7.1.1 (a) (i))
Nearside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Rear Suspension arm attachment bracket/mounting corroded and seriously weakened sill holed and corroded (5.3.3 (b) (i))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill holed and corroded (7.1.1 (a) (i))
Offside Rear Suspension arm attachment bracket/mounting corroded and seriously weakened sill holed and corroded (5.3.3 (b) (i))
Brake disc worn, pitted or scored, but not seriously weakened corrosion to all brake discs (1.1.14 (a) (ii))
Front brake back plate corroded
Front corrosion to front and rear subframes
Front oil leaks
tpm light on
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement Axle/trailing arm bush (5.3.4 (a) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement radial/support arm (5.3.4 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement Axle/trailing arm bush (5.3.4 (a) (i))
Offside Suspension arm pin or bush worn but not resulting in excessive movement radial/support arm (5.3.4 (a) (i))
Rear sub frame and suspension components corroded
slight deterioration to exhaust rear silencer
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement Axle/trailing arm bush (5.3.4 (a) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement radial/support arm (5.3.4 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement Axle/trailing arm bush (5.3.4 (a) (i))
Offside Suspension arm pin or bush worn but not resulting in excessive movement radial/support arm (5.3.4 (a) (i))
Rear sub frame and suspension components corroded
slight deterioration to exhaust rear silencer
Items Removed From Drivers View Of Screen
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Tyres Starting To Get Low
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Inner Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Inner Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Child seat fitted not allowing full inspection of adult belt
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Child seat fitted not allowing full inspection of adult belt
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Rear wheel bearing rough when rotated (2.6.1)
Nearside front tyre nearing legal limit
Offside front tyre nearing legal limit and cut in side wall not showing cords
Slight noise on offside rear wheel when rotated
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
How Reliable is the Dodge Caliber?
Based on 69,277 MOT tests across 4,774 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
WG07 XMD is a 2007 Dodge Caliber in Red with a 1,998cc petrol engine. This vehicle has been through 25 MOT tests with a personal pass rate of 60%.
Across all 2007 Dodge Caliber models, the average MOT pass rate is 66.5% with a typical mileage of 66,005 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Dodge Caliber fails its MOT is suspension arm has excessive play in a ball joint, accounting for 3,411 recorded failures. If you're considering buying WG07 XMD, it's worth having these areas checked by a mechanic before committing.
The Dodge Caliber typically stays on UK roads for around 20 years. At 19 years old, this Dodge Caliber is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of WG07 XMD?
You can check the full history of WG07 XMD by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was WG07 XMD registered?
WG07 XMD is a 2007 Dodge Caliber, first registered on 29 June 2007.
Is WG07 XMD safe to buy?
The MOT history for WG07 XMD shows 25 tests with a 60% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does WG07 XMD have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on WG07 XMD. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.