MOT Status
ExpiredMileage
82,303 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Side repeater slightly discoloured (4.4.3 (a))
Offside Front Macpherson strut top bush or bearing has excessive wear or free play (5.3.4 (a) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Side repeater slightly discoloured (4.4.3 (a))
Items removed from driver's view prior to test from windscreen ()
Nearside Direction indicator slightly discoloured repeater light (4.4.3 (a))
Nearside Front Suspension component damaged but not seriously weakened suspension top mount worn (5.3.3 (b) (i))
Offside Direction indicator slightly discoloured repeater light (4.4.3 (a))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Nearside Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Headlamp aim too low (4.1.2 (a))
Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Offside Front Lower Suspension arm corroded and seriously weakened (5.3.3 (b) (i))
Offside Front Suspension component damaged and seriously weakened Suspension strut/shock absorber bent (5.3.3 (b) (i))
Offside Headlamp aim too low (4.1.2 (a))
Offside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Rear Sub-frame corroded and seriously weakened (5.3.3 (b) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Fuel Pipe/s corroded filler neck ()
Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge 3mm (5.2.3 (e))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle (5.3.6 (a) (i))
Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Tyre worn close to legal limit/worn on edge 3mm (5.2.3 (e))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle (5.3.6 (a) (i))
Offside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Rear rear axle heavily corroded
rear shock absorber casings corroded
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front brake disc dust guards excessively corroded.
Nearside Front Upper Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Supplementary restraint system warning lamp does not illuminate (7.1.6 (a))
ignition switch defective
Front Registration plate does not conform to the specified requirements reflective backing deteriorated (0.1 (d))
Nearside Front Lower Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Front brake disc dust guards excessively corroded.
Items removed from driver's view prior to test ()
Nearside Front Upper Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
ignition switch defective
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Tyre worn close to the legal limit all four tyres ON LIMIT 175/60/14 h (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nail in nearside front tyre
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Hyundai I10?
Based on 2,829,935 MOT tests across 251,032 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
WG08 DYN is a 2008 Hyundai I10 in Red with a 1,086cc petrol engine. This vehicle has been through 18 MOT tests with a personal pass rate of 77.8%.
Across all 2008 Hyundai I10 models, the average MOT pass rate is 74.6% with a typical mileage of 47,534 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Hyundai I10 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 15,951 recorded failures. If you're considering buying WG08 DYN, it's worth having these areas checked by a mechanic before committing.
The Hyundai I10 typically stays on UK roads for around 18 years. At 18 years old, this Hyundai I10 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of WG08 DYN?
You can check the full history of WG08 DYN by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was WG08 DYN registered?
WG08 DYN is a 2008 Hyundai I10, first registered on 15 May 2008.
Is WG08 DYN safe to buy?
The MOT history for WG08 DYN shows 18 tests with a 77.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does WG08 DYN have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on WG08 DYN. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.