MOT Status
ExpiredMileage
190,412 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Front Windscreen wiper blade defective both sides (3.4 (b) (i))
Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Sub-frame corroded but not seriously weakened front and rear (5.3.3 (b) (i))
engine management light on (first used before 1st july 08
Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Speedometer cannot be illuminated (7.8 (c) (ii))
Nearside Front Suspension arm ball joint likely to become detached (5.3.4 (a) (ii)) DANGEROUS
Sub-frame corroded but not seriously weakened front and rear (5.3.3 (b) (i))
engine management light on (first used before 1st july 08
Both sides outer sills covers corroding
Clutch pedal anti slip rubber missing
Exhaust has a minor leak of exhaust gases front flexy (6.1.2 (a))
Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))
Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))
Offside Rear Service brake excessively binding (1.2.1 (f))
Position lamp not working BOTH sides front (4.2.1 (a))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Both sides outer sills covers corroding
Clutch pedal anti slip rubber missing
Exhaust has a minor leak of exhaust gases front flexy (6.1.2 (a))
Items removed from driver's view prior to test ()
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Offside Front Shock absorber has a light misting of oil (2.7.3)
Offside Rear Shock absorber has a light misting of oil (2.7.3)
Offside Outer Seat belt anchorage prescribed area is excessively corroded sill at front (5.2.6)
Items removed from driver's view prior to test ()
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Offside Front Shock absorber has a light misting of oil (2.7.3)
Offside Rear Shock absorber has a light misting of oil (2.7.3)
Front Brake pad(s) wearing thin (3.5.1g)
Front flexy on exhaust deteriorated
Rear Both sides tyres bald inner edges
Nearside Rear Upper Suspension arm has excessive play in a pin/bush outer bush (2.4.G.2)
Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Offside Rear Upper Suspension arm has excessive play in a pin/bush outer bush (2.4.G.2)
Front Brake pad(s) wearing thin (3.5.1g)
Front flexy on exhaust deteriorated
Rear Both sides tyres bald inner edges
Grease around o/s inner cv boot ( boot looks ok)
Offside Rear Upper Suspension arm has slight play in a pin/bush (2.4.G.2)
Grease around o/s inner cv boot ( boot looks ok)
Nearside Front Front wheel bearing has excessive play (2.5.A.3c)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Rear Upper Suspension arm has slight play in a pin/bush (2.4.G.2)
Nearside Front position lamp(s) not working (1.1.A.3b)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Track rod end ball joint has slight play (2.2.B.1f)
Front Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Headlamp aim too low (1.8)
Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Parking brake: efficiency below requirements (3.7.B.7)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Steering arm has relative movement at its fixings (2.2.B.1h)
Nearside Front Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
How Reliable is the Dodge Caliber?
Based on 69,277 MOT tests across 4,774 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
WG08 UWT is a 2008 Dodge Caliber in Silver with a 1,968cc diesel engine. This vehicle has been through 21 MOT tests with a personal pass rate of 57.1%.
Across all 2008 Dodge Caliber models, the average MOT pass rate is 67.4% with a typical mileage of 59,760 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Dodge Caliber fails its MOT is suspension arm has excessive play in a ball joint, accounting for 3,411 recorded failures. If you're considering buying WG08 UWT, it's worth having these areas checked by a mechanic before committing.
The Dodge Caliber typically stays on UK roads for around 20 years. At 18 years old, this Dodge Caliber is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of WG08 UWT?
You can check the full history of WG08 UWT by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was WG08 UWT registered?
WG08 UWT is a 2008 Dodge Caliber, first registered on 30 June 2008.
Is WG08 UWT safe to buy?
The MOT history for WG08 UWT shows 21 tests with a 57.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does WG08 UWT have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on WG08 UWT. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.