2009 Yamaha Wr 125 R

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Footrest missing (6.2.12 (a))

Front Shock absorber has a serious fluid leak (5.3.2 (b))

Rear Registration plate does not conform to the specified requirements (0.1 (d))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Front Engine mounting/bracket excessively loose (6.1.8 (a) (ii)) DANGEROUS

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Front Tyre worn close to the legal limit (5.2.3 (e))

Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Front Engine mounting/bracket excessively loose (6.1.8 (a) (ii)) DANGEROUS

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Chain guard missing ()

Frame has numerous areas of light corrosion

Nearside Rear Wheel bearing dust seal badly damaged

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

All direction indicators not working (4.4.1 (a) (ii))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Headlamp not working on main beam (4.1.1 (a) (ii))

Rear Position lamp not working (4.2.1 (a))

Rear reflector missing (4.8.2 (a) (ii))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Stop lamp not working (4.3.1 (a) (ii))

Chain guard missing ()

Frame has numerous areas of light corrosion

Nearside Rear Wheel bearing dust seal badly damaged

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Central Front fuel cap sealing washer starting to perish on edge

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Wheel alignment slightly misaligned (2.4 (a))

Rear suspension slightly stiff

Central Front fuel cap sealing washer starting to perish on edge

Front Headlamp aim too high and too far to the right beam kick up wrong direction (4.1.2 (a))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Wheel alignment slightly misaligned (2.4 (a))

Rear suspension slightly stiff

Front Brake grabbing severely (1.2.1 (c))

Front Brake indicates excessive fluctuation of brake effort warped disc (1.2.1 (e))

Front Steering operation fouling on the fuel tank or bodywork on full lock front mudguard hitting radiator guard could impede steering (2.1.4 (b))

Rear Brake pedal has insufficient reserve travel Brake pads below limit no reserve travel (1.1.2 (a))

Rear Drive chain sprocket worn to excess (6.1.7 (c) (i))

Rear Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Rear Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Rear Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Rear Drive chain sprocket so worn it is likely to fail Sprocket teeth missing (6.1.7 (c) (ii)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Front Handle bars out of line slightly

Front fuel cap sealing washer starting to perish on edge

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Riders seat slightly loose one bolt missing (6.2.5 (a) (ii))

Rear rear suspension slightly stiff

Brake lever is short but brake can still be readily applied end of lever broken (1.1.2 (d))

Rear Tyre worn close to the legal limit (5.2.3 (e))

front tyre has perishing cracks on side wall

no lights fitted or masked up at time of test

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Rear Shock absorber has a light misting of oil (5.3.2 (b))

Rear Suspension pin, bush or joint worn but not resulting in excessive movement Shock lower bush (5.3.4 (a) (i))

Brake disc significantly and obviously worn (1.1.14 (a) (i))

Exhaust has a major leak of exhaust gases At cylinder head gasket (6.1.2 (a))

Front Brake indicates excessive fluctuation of brake effort Disc looks distorted (1.2.1 (e))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Rear Shock absorber has a light misting of oil (5.3.2 (b))

Rear Suspension pin, bush or joint worn but not resulting in excessive movement Shock lower bush (5.3.4 (a) (i))

Exhaust noisy (7.1.2)

Front Brake disc(s) slightly worn (3.2.A1l)

Rear Brake disc(s) slightly scored (3.2.A1l)

Rear suspension bush has slight free play (2.4.A2a(i))

Roller brake test indicates slight fluctuation of brake effort Front and rear (3.3.A1d)

Steering headbearing has slight free play (2.2.2)

Rear Drive chain slightly loose (6.2.1d)

Rear Rear suspension bush has slight free play slight play in shock bushes (2.4.A2a(i))

Rear tyre showing signs of wear not uncommon for a off road bike

Wheel alignment slightly misaligned. (2.5.1)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Wheel damaged but not significantly reducing the original strength (4.2.1a)

Headlamp aim too high (1.6)

Headlamp insecure (1.2.3b)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Wheel damaged but not significantly reducing the original strength (4.2.1a)

Chain guard missing

Front Brake disc(s) slightly worn (3.2.A1l)

Front Wheel damaged but not significantly reducing the original strength (4.2.1a)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Wheel damaged but not significantly reducing the original strength (4.2.1a)

Chain guard missing

Lower Rear suspension bush has slight free play (2.4.A2a(i))

Front wheel bearings have excessive free play (2.3.5b)

Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Lower Rear suspension bush has excessive free play (2.4.A2a(i))

Rear reflector on motorcycle missing (1.4.1)

Rear wheel bearings have excessive free play (2.4.A.2c)

Registration plate displaying a honeycomb or similar effect background (6.3.3)