2003 Subaru Forester

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Battery insecure and likely to fall from carrier (4.13 (a) (ii))

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Suspension component ball joint excessively worn (5.3.4 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front splash guard insecure

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced and offside rear inner wheel arches (7.1.1 (a) (i))

Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front splash guard insecure

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust has a major leak of exhaust gases (7.1.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Both front tyres worn on the inner edge and getting close to legal maximum limit of wear.

Front brake pads worn thin.

Play/wear in nearside front anti-roll bar drop link ball joint but not considered excessive at this time.

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Under-trays fitted obscuring some underside components

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Service brake grabbing slightly (3.7.C.2)

slight wear n/s/f drop link

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Front Front position lamp(s) not working (1.1.A.3b)

Tyre worn close to the legal limit (4.1.E.1)