2016 Lexmoto Zsx

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Front Brake fluid reservoir fluid level below minimum level (1.1.10 (d) (i))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Brake fluid below minimum mark (1.1.10 (d) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Offside Rear Footrest insecure (6.2.12 (a))

Drive chain excessively loose (6.1.7 (c) (i))

Drive chain worn to excess (6.1.7 (c) (i))

Front Shock absorber has a serious fluid leak (5.3.2 (b))

Front Shock absorber has negligible damping effect (5.3.2 (b))

Wheel alignment incorrect which adversely affects the handling Suspect forks incorrectly installed (2.4 (a))

Rear Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Front Steering/ suspension component slightly misaligned or deformed

Wheel alignment slightly misaligned (2.4 (a))

Brake pedal has insufficient reserve travel rear brake inoperative (1.1.2 (a))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Headlamp reflector seriously defective obscured by 'L' plate (4.1.1 (b) (ii))

Rear Footrest missing Both (6.2.12 (a))

Rear Stop lamp not working (4.3.1 (a) (ii))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Front Steering/ suspension component slightly misaligned or deformed

Wheel alignment slightly misaligned (2.4 (a))

Clutch lever bent (6.2.7 (b))

Clutch lever pivot slightly worn.

Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Rear Drive chain excessively tight (6.1.7 (k) (i))

Clutch lever bent (6.2.7 (b))

Clutch lever pivot slightly worn.

Rear Brake hose excessively twisted (1.1.12 (b) (ii))

Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Steering headbearing has excessive wear or free play (2.2.2 (f) (i))