2008 Mercedes-benz Cls

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Nearside Front Headlamp aim too low (4.1.2 (a))

Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Front Headlamp aim unable to be tested (4.1.2 (b))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Front Suspension arm ball joint dust cover severely deteriorated rear arm (5.3.4 (b) (i))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Exhaust mounting defective (6.1.2 (a))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Exhaust mounting defective (6.1.2 (a))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Fuel system component leaking (6.1.3 (b) (i))

Nearside Front Engine mounting bracket damaged or deteriorated resulting in excessive movement (6.1.8 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Tyre worn close to legal limit/worn on edge both rear just on limit (5.2.3 (e))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Tyre worn close to legal limit/worn on edge both rear just on limit (5.2.3 (e))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement backward (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement backward (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. 25% (1.2.1 (b) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement n/s and o/s rear (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Play in steering rack inner joint(s)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Lower Ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Engine covers fitted obscuring some components in the engine bay

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Under-trays fitted obscuring some underside components

nearside front tyre outer wall slightly damaged

offside rear tyre outer wall slightly damaged

Engine covers fitted obscuring some components in the engine bay

Nearside Front position lamp(s) not working (1.1.A.3b)

Under-trays fitted obscuring some underside components

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components