2002 Honda Xlr 125

Rear Suspension arm ball joint worn, but not excessively (5.3.4 (a) (i))

Rear Stop lamp not working Broken spring. (4.3.1 (a) (ii))

Rear Suspension arm ball joint worn, but not excessively (5.3.4 (a) (i))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Front Brake excessively binding (1.2.1 (f))

Headlamp aim projected beam image obviously incorrect (4.1.2 (c))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Central Rear Lower Suspension arm pin or bush excessively worn mono shock link. (5.3.4 (a) (i))

Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i))

Drive chain worn to excess (6.1.7 (c) (i))

Headlamp not working on main beam (4.1.1 (a) (ii))

Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Front Brake binding but not excessively (1.2.1 (f))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Front Wheel bearing has slight play (5.1.3 (a) (i))

Drive chain excessively loose (6.1.7 (c) (i))

Front Wheel bearing has slight play (5.1.3 (a) (i))

Handlebar deformed but serviceable (2.2.1 (c) (i))

Handlebar deformed but serviceable (2.2.1 (c) (i))

Rear reflector missing (4.8.2 (a) (ii))

Upper Rear suspension bush has slight free play (2.4.A2a(i))

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Rear Rear wheel bearings have excessive free play (2.4.A.2c)

Upper Rear suspension bush has slight free play (2.4.A2a(i))

Rear Direction indicator slightly discoloured (1.5.1b)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Nearside handle bar grip not fully secure

handle bar mounts slightly bent

headlight switch damaged but functions

high beam blue panel light not working

speedometer background light not working

Front Wheel has a slightly distorted bead rim. (4.2.2)

Nearside handle bar grip not fully secure

Rear reflector on motorcycle missing (1.4.1)

Registration plate delaminated (6.3.1.d)

handle bar mounts slightly bent

headlight switch damaged but functions

high beam blue panel light not working

speedometer background light not working

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Headlamp aim too low (1.6)

Indicator tell tale not functioning (1.5.2)

Indicator tell tale not functioning (1.5.2)

Indicator tell tale not functioning (1.5.2)

Nearside Rear Footrest missing (6.2.1a)

Offside Rear Footrest missing (6.2.1a)

Rear position lamp missing (1.1.1a)

Rear reflector on motorcycle missing (1.4.1)

Drive chain worn but not considered excessive (6.2.1e)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Steering headbearing has slight free play (2.2.2)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front suspension assembly slightly misaligned (2.3.1)

Roller brake test Higher brake efficiency normally obtainable. (3.3.A2a)

Wheel alignment slightly misaligned. (2.5.1)

speedo drive damaged

Headlamp aim too low (1.6)

Horn not working (1.7.3a)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front suspension assembly slightly misaligned (2.3.1)

Roller brake test Higher brake efficiency normally obtainable. (3.3.A2a)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Wheel alignment slightly misaligned. (2.5.1)

speedo drive damaged

Drive chain worn to excess (6.2.1e)

Front Brake disc(s) has excessive run out (3.2.A1m)

Front suspension assembly component excessively bent (2.3.1)

Rear Roller brake test indicates a sticking brake (3.3.A1a)

Registration plate deteriorated (6.3.1d)