2003 Mazda MX-5

Nearside Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Nearside Rear Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Offside Front Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Offside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

general under body corrosion

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Front Position lamp not working nearside and offside (4.2.1 (a) (ii))

Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Nearside Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Nearside Rear Suspension component mounting repair covered in underseal sill (5.3.6 (a) (i))

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Offside Rear Suspension component mounting repair covered in underseal sill (5.3.6 (a) (i))

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened nearside and offside (1.1.14 (a) (ii))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

high level brake light not working

surface corrosion on all suspension components

Central Oil leak, but not excessive (8.4.1 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened Both (1.1.14 (a) (ii))

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Brake pipe inadequately clipped or supported (1.1.11 (d) (i))

Nearside Front Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Front Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Rear Brake disc worn, but not excessively Both (1.1.14 (a) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Offside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i))

Central Oil leak, but not excessive (8.4.1 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened Both (1.1.14 (a) (ii))

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Brake pipe inadequately clipped or supported (1.1.11 (d) (i))

Nearside Front Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Front Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Rear Brake disc worn, but not excessively Both (1.1.14 (a) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

engine oil leak

Oil leak ()

Brake pipe excessively corroded front to rear, towards the rear. (3.6.B.2c)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Tyre walls cracking.

Nearside front brake binding (3.7.B.1)

Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside Front Tyre not fitted in accordance with side wall instructions (4.1.D.1f)

Offside Front Tyre not fitted in accordance with side wall instructions (4.1.D.1f)

both front tyres worn down to wear bars 2-3MM of tread left

Nearside Front brake disc slightly pitted (3.5.1h)

Nearside Rear brake disc slightly pitted (3.5.1h)

Offside Front brake disc slightly pitted (3.5.1h)

Offside Rear brake disc slightly pitted (3.5.1h)